outside versus inside
February 24th, 2009, 02:01 PM
#1
Registered User
Thread Starter
Join Date: Feb 2009
Posts: 6
outside versus inside
I biuld scale model cars of oldsmobiles and need to know what correct colors were available to go on the outside of a 1966 olds 442 when the inside is red? Any help would be appriciated.
February 24th, 2009, 02:20 PM
#2
Registered
Join Date: Jul 2006
Location: Northeast Ohio
Posts: 4,430
The recommended 1966 exterior colors for a red interior.
Ebony Black
Provincial White
Burgundy Mist
Target Red
If it's two tone there are recommended combination colors too.
TCP color chip library.
http://www.tcpglobal.com/autocolorlibrary/
I have a Vista Cruiser so I built this wagon
models 002.jpg
Ebony Black
Provincial White
Burgundy Mist
Target Red
If it's two tone there are recommended combination colors too.
TCP color chip library.
http://www.tcpglobal.com/autocolorlibrary/
I have a Vista Cruiser so I built this wagon
models 002.jpg
Last edited by Bluevista; February 24th, 2009 at 02:23 PM.
February 24th, 2009, 03:18 PM
#4
Old(s) Fart
Join Date: Mar 2007
Location: Northern VA
Posts: 47,735
You could have ordered any available exterior and interior color combination, but Olds had SUGGESTED combinations. Black, White, Target Red, Silver Mist would have been the likely suggested exterior colors to go with the red interior. Possibly Burgundy Mist also.
February 27th, 2009, 10:58 AM
#8
Old(s) Fart
Join Date: Mar 2007
Location: Northern VA
Posts: 47,735
February 28th, 2009, 11:47 AM
#9
Past Administrator
Join Date: May 2004
Location: Rural Waxahachie Texas
Posts: 10,074
Thread
Thread Starter
Forum
Replies
Last Post
