mondello/tenn. quality?
#1
mondello/tenn. quality?
Hey guys,I'm looking for a OLDS machinist.I'm in N. alabama,I've already learned about CA. location.So can i trust tenn/mondello?I've bought an engine w/mondello parts,theres some other things they make i'd like to have[windage tray]Hows the quality of there parts?Can i do buisness directly w/JOE?Looking for machinist in area that knows olds.Thanks,tell me hows there service?Later,BO
#2
There is always a lot of discussion on the other Oldsmobile site regarding this issue. IMHO, I would contact Dick Miller, Hernando Mississippi, and have him build your motor. I'm not sure how far away that is for you. I'm also not sure that Joe Mondello is still available, he may be, you will have to hear from others to confirm this. I do know that I would not choose the west coast counterpart for much of anything other than an occasional part I couldn't obtain elsewhere. There are many talented Olds engine builders out there. Ask Mike Richards who I believe lives in Alabama and is a OCA expert on 66 and 67 442's who he would reccommend. A lot depends on what you are building your engine for, is it an all out race motor or is it an upgrade to a basic street application? Huge difference in what will be required.
Last edited by 442garage; June 3rd, 2009 at 10:41 AM. Reason: typo
#3
Thanks,I'd call my engine ''middle of the road''.I want all the performance i can get,without expensive ''throw money at it ''approach.I plan on doing assembly myself.My engine was purchased disassembled,with some machine work done[bored .030]I need to get it to someone who can tell what's been done already,and who knows what ''tricks'' an OLDS needs.It's primarily a 1/8 car,1.67 60's/8'11/84 mph.I'd also like to keep it streetable.Engines a 455,bored 30,C heads[gonna,fill crossover,braze divider,home port]
engle cam,474/480 adj. 512/523,N crank,stock rods.Like it to pull to 52-5500.I'm not sure of the mods needed for this goal,it will see WOT every time i drive it.Thanks,BO
engle cam,474/480 adj. 512/523,N crank,stock rods.Like it to pull to 52-5500.I'm not sure of the mods needed for this goal,it will see WOT every time i drive it.Thanks,BO
#6
One of the best in the country.
http://www.btrperformance.com/
Bill took 8th place in this year's Engine Masters competition. He knows Oldsmobile.
http://www.btrperformance.com/
Bill took 8th place in this year's Engine Masters competition. He knows Oldsmobile.
#8
Thank you,I'm looking for someone a little closer to home.I came up with a name in a search,ALAN ROEHRICH,yesterday.I believe his shop is MIDDLE TENN MACHINE,even found some posts by him ,he's not to far away.What do yall know about his work,and prices?DICK MILLER,is in MISS.,I'm going to order some parts from him,but i have a feeling i coulnt afford machine work there.I guess it wouldnt hurt to ask,though.Thanks guys,keep it coming.Theres got to be some southern olds guys on here,later,BO
Thread
Thread Starter
Forum
Replies
Last Post
1964F85
General Discussion
25
November 13th, 2019 08:40 PM
Bluevista
Vista Cruiser & Wagons
15
October 17th, 2014 05:04 PM