Mag Hytec transmission pan
November 15th, 2014, 11:24 PM
#1
Registered User
Thread Starter
Join Date: Apr 2012
Location: Elkridge, MD
Posts: 26
Mag Hytec transmission pan
I installed a Mag-Hytec TH400 transmission pan on my 72 442. I had to fabricate two brackets out of flat alumium bar stock to relocate the shift linkage over one inch to clear the boss on the pan. It sits a little lower than the stock pan. iphonepics2354_zps1e4063c8.jpg
Last edited by railfan442; November 15th, 2014 at 11:31 PM.
November 15th, 2014, 11:28 PM
#2
Registered User
Thread Starter
Join Date: Apr 2012
Location: Elkridge, MD
Posts: 26
November 15th, 2014, 11:29 PM
#3
Registered User
Thread Starter
Join Date: Apr 2012
Location: Elkridge, MD
Posts: 26
Thread
Thread Starter
Forum
Replies
Last Post
BIGJERR
General Discussion
16
August 11th, 2011 03:18 PM
