altenator raised fin
#1
altenator raised fin
been looking for a correct altenator for my 70 442. i know the 69-70 vette has the internal reg open face with raised ribs in rear as do the 70 GTO and the firebird. my question is are the number stampings the same between different manufactures?
#2
Charlie I've always believed they are specific not only to make but models too. I've been told the one I found and plan to use in my 1970 442 is correct for the 1970 W30. If I'm wrong someone will have to speak up and enlighten us both! John
P1010107-1.jpg
P1010110-1.jpg
P1010108-2.jpg
P1010107-1.jpg
P1010110-1.jpg
P1010108-2.jpg
#3
i believe you are right john, i think i will get a correct looking one {open face, raised ribbed} for now and take my time looking for a correct number later!
#4
John, That number is correct for 1970 442 as well as W30 optioned cars with heavy duty cooling ( 4 core rad cars) If you have a 2 or 3 core rad, the right number is ends in "880". The diamond back or raised fins on the back, are correct for both aplications.
Thread
Thread Starter
Forum
Replies
Last Post
RATCHETMASTER
Cutlass
2
January 13th, 2012 08:54 AM