66-3x2 442
#2
#6
#9
What about this one?
https://www.mecum.com/lots/FL0117-26...42-club-coupe/
This was an Alabama car sold out of Gores Corvette world last spring - I think it was for around 20k, and it quickly changed hands a few times and ended up here. Thought it was a pretty good deal at 20....
https://www.mecum.com/lots/FL0117-26...42-club-coupe/
This was an Alabama car sold out of Gores Corvette world last spring - I think it was for around 20k, and it quickly changed hands a few times and ended up here. Thought it was a pretty good deal at 20....
#10
What about this one?
https://www.mecum.com/lots/FL0117-26...42-club-coupe/
This was an Alabama car sold out of Gores Corvette world last spring - I think it was for around 20k, and it quickly changed hands a few times and ended up here. Thought it was a pretty good deal at 20....
https://www.mecum.com/lots/FL0117-26...42-club-coupe/
This was an Alabama car sold out of Gores Corvette world last spring - I think it was for around 20k, and it quickly changed hands a few times and ended up here. Thought it was a pretty good deal at 20....
#13
Disclaimer?
Good catch with the protecto-plate! There is zero further reference to documentation.
"Believed to be one of only 157 L69 F85 Club Coupes 442s produced in 1966"
Keywords; believed to be
"Believed to be one of only 157 L69 F85 Club Coupes 442s produced in 1966"
Keywords; believed to be
#14
The blue car is a cloned up unit. It was originally from a town about 10 miles from me. It was a three on the tree V-8 and was turned into a 442 by a friend of mine. I built the carbs on it right before he sold it. He never misrepresented the car either but as with most of these cars,the story gets changed to optimize profits.
#15
The Black/Blue Track Pac has been pulled from Friday's auction.
https://www.mecum.com/lots/FL0117-26...adb1-112596841
https://www.mecum.com/lots/FL0117-26...adb1-112596841
#18
66 did not use notched valve covers because they used a smaller brake booster unlike the larger 67 booster. 67 did not use a notched cover on the passenger side because there no conflict with the A/C housing.
Thread
Thread Starter
Forum
Replies
Last Post