For Sale

Just wondering what gap to set my points on my 1970 cutlass 350 v8. Thanks

Jim's rare 80

Hi. Welcome to the forum. I'm new myself. According to my book, with the points open completely, (rubbing block resting on high point of cam) using a flat feeler gauge, set the point openings at 0.019in for new points, 0.016in for used. Run engine to operating temp, set point dwell to 28-32deg. Then set timing to 10 btdc. (14 btdc for w31). Hope this helps. Anything else, let us know. Good ridin'. Jim.

For Sale

Thanks for the info. I decided to go with the electronic ignition upgrade. I used the Pertronix kit , it worked excellent.