70 delta 88 custom
#41
scarbird didnt seem to want to be very helpfull as with anyone i have contacted about these cars all i get is laughed at and have been told things i didnt like
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
#42
scarbird didnt seem to want to be very helpfull as with anyone i have contacted about these cars all i get is laughed at and have been told things i didnt like
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
#43
I think I may have found your rotors and drums, I was checking through some reference books of mine an d fouind the dimensions match up to : autozone part # DGR5516 front rotors, and depending on the width of your brake shoe, 8873, 8812 or 8504 for the rear drums,,, hope this helps
#44
scarbird didnt seem to want to be very helpfull as with anyone i have contacted about these cars all i get is laughed at and have been told things i didnt like
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
ssbc when u call them they say they dont make that kit anymore no need for it !!!!
so my thoughts are what about a rotor same diameter and have a billet spacer behind it i realize there will be a bearing issue then but that may be easier to find i need to get a spindle and extra rotor
wish i had a cnc machine !!!lol
I should be ordering there kit in the next month
#46
autozone number is the b-body cars and chevy truck but 71-76 b-body and 76-82 chevy truck thanks for the info
i will pick one up and check the thickness and where the bearing race sets because that is what i am finding is the problem this is the rotor joe is talking about so we will pick one up and see what is the difference
thanks again guys for all the help
i will pick one up and check the thickness and where the bearing race sets because that is what i am finding is the problem this is the rotor joe is talking about so we will pick one up and see what is the difference
thanks again guys for all the help
#48
i will definitely let everyone know i also found a connection at a brake rotor facility and the connection is an engineer there so im tryin to get in touch with him a friend said he knows they have done some custom stuff before so if i can talk with him i will definitely have to get a list together for those who want them i know one set will last the rest of my lifetime
#49
i'm younger i think as you
just kidding,
i found only one solution, expencive i know but it contains all i think
they sell a full kit whit a lot i think i do not need like the booster.
and i could ask local steel c&c workers to manufactor one but that's also getting expencive in labour.
just kidding,
i found only one solution, expencive i know but it contains all i think
they sell a full kit whit a lot i think i do not need like the booster.
and i could ask local steel c&c workers to manufactor one but that's also getting expencive in labour.
#51
1969 - 1970 olds full size front rotors
I have N.O.S. Front Brake Rotors for the 1967 - 1968 and the 1969 - 1970 OLDS FULL SIZE!!!!!!!!!!! (they are different.......) I also have the Rear Brake Drums for the 1963 - 1970 Olds Full Size.........
Best to call me -- Craig - 516 - 485 - 1935....New York.....
Best to call me -- Craig - 516 - 485 - 1935....New York.....
#52
i will definitely let everyone know i also found a connection at a brake rotor facility and the connection is an engineer there so im tryin to get in touch with him a friend said he knows they have done some custom stuff before so if i can talk with him i will definitely have to get a list together for those who want them i know one set will last the rest of my lifetime
#53
Seems Mr. Craig Studnick (a.k.a. "The Antique Automotive King") of West Hempstead, NY has quite a solid reputation as a knowledgeable vendor of brake parts in the collector car market. Apparently he vends at Carlisle events regularly. I found numerous postings on various forums saying good things about Craig with a couple of quick Google searches.
I like a happy ending
#54
If you still need spindles &/or rotors from a '70 Delta 88 custom, give me a call, I just removed all these parts from one in a yard last week. The car is still there & pretty solid if you need anything else.
http://s856.photobucket.com/albums/a...ile%20Uploads/
Thanks.
Scott
c. 317-727-7041
http://s856.photobucket.com/albums/a...ile%20Uploads/
Thanks.
Scott
c. 317-727-7041
#55
I've got the spindles and rotors from a 70 Delta in the Parts For Sale section, if anyone is interested.
https://classicoldsmobile.com/forums...ake-setup.html
https://classicoldsmobile.com/forums...ake-setup.html
#56
1969 - 1970 & 1967 - 1968 olds full size rotors
I have the 1969 - 1970 OLDS FULL SIZE ROTORS & the
1967 - 1968 OLDS FULL SIZE ROTORS --- all N.O.S. -- that is the only way to have them, and those two ARE different; I have both....
Nobody ever reproduced either one, nobody ever will reproduce either one; there are just not enough vehicles that had them, even fewer that still exist with them; and way too pricey to make............
Best to call me --- Craig -- 516 - 485 - 1935.............
And I have some N.O.S. +Asbestos+ Disc Brake pads so you don't "rip up" these rotors -- and only have to buy them once!!!!!!!!
1967 - 1968 OLDS FULL SIZE ROTORS --- all N.O.S. -- that is the only way to have them, and those two ARE different; I have both....
Nobody ever reproduced either one, nobody ever will reproduce either one; there are just not enough vehicles that had them, even fewer that still exist with them; and way too pricey to make............
Best to call me --- Craig -- 516 - 485 - 1935.............
And I have some N.O.S. +Asbestos+ Disc Brake pads so you don't "rip up" these rotors -- and only have to buy them once!!!!!!!!
#57
mobile parts i will call you hope you still have these can you send me a price to my email please
brian.russell88@yahoo.com
also check this page i just ran across this listing is for the impala but i will call them also and check into this option. dont know if i want to lower the car two inches it already sits low with my wheel and tire option but if i go ahead and put an air ride system on it that will help
any input on this system from anyone will help, would still like to have an option like this so i can run available rotors..
http://www.classicperform.com/Instru.../PDF/30101.pdf
brian.russell88@yahoo.com
also check this page i just ran across this listing is for the impala but i will call them also and check into this option. dont know if i want to lower the car two inches it already sits low with my wheel and tire option but if i go ahead and put an air ride system on it that will help
any input on this system from anyone will help, would still like to have an option like this so i can run available rotors..
http://www.classicperform.com/Instru.../PDF/30101.pdf
#58
ok just called this place http://www.classicperform.com/fullsize.htm#3 and the tech guy said as far as he knows this kit will work with all gm b body cars, you can get the disc brakes only but you have to have the 65-68 spindle just like with ssbc or scarbid. BUT the kit with 2 inch drop spindles will be everything you need
looks like i will be lowering the 88 two inches with new spindles and rotors and i guess i will get a rear end ordered also gonna be a good winter for the old girl
looks like i will be lowering the 88 two inches with new spindles and rotors and i guess i will get a rear end ordered also gonna be a good winter for the old girl
#59
1969 & 1970 olds full size rotors & drums
Don't know if you've solved your situation -- but if you want BRAND NEW
FRONT ROTORS & BRAND NEW REAR BRAKE DRUMS ---- I have the factory correct Rotors & Drums..... yes, they are very difficult to find on planet earth.......... a bonus is that I have some N.O.S. Front Disc Brake pads and some Rear Brake Shoes for these ----- in +++ ASBESTOS ++++ so you don't rip to shreads these Rotors & Drums.... you want to make this a
once -- only -- purchase.......
Best to call me --- Craig -- 516 - 485 - 1935...........
FRONT ROTORS & BRAND NEW REAR BRAKE DRUMS ---- I have the factory correct Rotors & Drums..... yes, they are very difficult to find on planet earth.......... a bonus is that I have some N.O.S. Front Disc Brake pads and some Rear Brake Shoes for these ----- in +++ ASBESTOS ++++ so you don't rip to shreads these Rotors & Drums.... you want to make this a
once -- only -- purchase.......
Best to call me --- Craig -- 516 - 485 - 1935...........
#60
1967 - 1968 & 1969 - 1970 olds full size rotors
Both of these ROTORS (& they are very different) are in V E R Y short supply around the planet BRAND NEW........
I have both of them at this moment in time, but not a lot of either.....
I also have some N.O.S. ++ Asbestos ++ brake Pads for both applications... even the pads are very different.....
I am not in the library every day - to use the computer,
Best to simply call me -- CRAIG -- 516 - 485 - 1935........
I have both of them at this moment in time, but not a lot of either.....
I also have some N.O.S. ++ Asbestos ++ brake Pads for both applications... even the pads are very different.....
I am not in the library every day - to use the computer,
Best to simply call me -- CRAIG -- 516 - 485 - 1935........
#61
ok just called this place http://www.classicperform.com/fullsize.htm#3 and the tech guy said as far as he knows this kit will work with all gm b body cars, you can get the disc brakes only but you have to have the 65-68 spindle just like with ssbc or scarbid. BUT the kit with 2 inch drop spindles will be everything you need
looks like i will be lowering the 88 two inches with new spindles and rotors and i guess i will get a rear end ordered also gonna be a good winter for the old girl
looks like i will be lowering the 88 two inches with new spindles and rotors and i guess i will get a rear end ordered also gonna be a good winter for the old girl
#62
1969 - 1970 olds full size rotors
If any of you are still looking for these rotors ------ they are indeed 1969 - 1970 OLDS FULL SIZE --- ONLY ---- and I have exactly 2 N.O.S. remaining -----------
Call me fast; got three people "hemming & hawing" about 'em -----
Craig -- 516 - 485 - 1935 .... New York......
P.S. They will N E V E R be reproduced........
Call me fast; got three people "hemming & hawing" about 'em -----
Craig -- 516 - 485 - 1935 .... New York......
P.S. They will N E V E R be reproduced........
#63
I had answered this question under some other place -- but since the question has arisen again -- I have EXACTLY 2 Front OEM Kelsey - Hayes Front HUB & ROTORS for the 1967 - 1968 OLDSMOBILE FULL SIZE application.... and EXACTLY 2 front OEM Kelsey - Hayes Front Rotors ("Plates" only) for the 1969 - 1970 OLDS FULL SIZE applications (I can supply you with Used Hubs, as well!!)
Call me before they're history -- Craig -- 516 - 485 - 1935..... New York.....
Call me before they're history -- Craig -- 516 - 485 - 1935..... New York.....
#64
Hi russell7088.. I found this thread searching for rotors for my 1970 delta 88 convertable and we had the same problem. I was wondering did you find something that worked for you?? My email is cbutler258@gmail.com you can reply or contact me by email, either way works thanks and I hope you see this
Thread
Thread Starter
Forum
Replies
Last Post
Fred Kiehl
Parts For Sale
0
June 16th, 2013 04:55 AM
317Cutty
General Discussion
24
February 4th, 2013 08:34 PM
Aussie67Delta88Custom
Eighty-Eight
10
February 22nd, 2008 04:49 AM