Hi this is my first post. I have a 1966 dynamic 88 2drht and I’m trying to find the body mount bushings. Thanks

 

Welcome. Unfortunately the Olds full size cars are not popular to restore. No one sells body mount kits for that car. The Olds frame and body mounts are not the same as for an Impala. Ames Performance lists individual body mount bushings in their catalog. You'll need to match your old ones up with these and order them individually.

 

Thank you. I’ve been looking everywhere. Just don’t know why they didn’t use the same for all the full size GM cars. I was having trouble finding a package tray but a friend had a 66 impala and it looked the same so I ordered one and except for the mesh covering it was exactly the same. So thanks again I will check them out.

 

The frame, suspension, and brakes on the 1965-70 B-body cars are completely different across divisions and do not interchange. The body mounts are tuned by each division for NVH and are different as a result. On the other hand, much of the interior and glass IS the same. I got my package shelf from Hubbards Impala parts.

 

The four large round cushions at the firewall and the two above the rear axle are available from Steele Rubber.
Steele Rubber Products - Body Mounting Pad Set | Steele Rubber Products

 

Thanks I’ll look there. Ames had the 8 smaller bushings but not the large ones so this is good news!

 

You wouldn’t happen to know the part number? I can’t seem to find any matches. Thanks Eric

 

70-2283-48