84 olds parts question

Old Oct 11, 2009 | 11:41 AM
  #1  
DDTCM's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 7
From: Austin TX
84 olds parts question

Where can I find some olds parts for a decent price? Need some bumper fillers and interior parts.
Old Oct 11, 2009 | 12:56 PM
  #2  
Allan R's Avatar
Just an Olds Guy
 
Joined: Jul 2008
Posts: 24,528
From: Edmonton, AB. And "I am Can 'eh' jun - eh"
Originally Posted by DDTCM
Where can I find some olds parts for a decent price? Need some bumper fillers and interior parts.
What kind of car? There's not a lot out there for body parts in the 1984 range right now if you're trying to buy new parts

Good news though>>>> The best place might be at your local wrecker. I was out on Friday, and they had several cutlass RWD, FWD and Delta/Ninety Eights. Not all of them end up in the wrecker because of front or rear end damge. There were lots of good filler panels. You just have to take the time to dismantle to get what you need. But the $ savings are worth it. Just be patient and try to avoid taking a sludgehammer approach to getting the parts off.

FYI, the filler panels and some interior trim is pretty much the same from 1980-1984 on most of the Olds lineups.
Old Oct 11, 2009 | 01:21 PM
  #3  
DDTCM's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 7
From: Austin TX
Originally Posted by Allan R
What kind of car? There's not a lot out there for body parts in the 1984 range right now if you're trying to buy new parts

Good news though>>>> The best place might be at your local wrecker. I was out on Friday, and they had several cutlass RWD, FWD and Delta/Ninety Eights. Not all of them end up in the wrecker because of front or rear end damge. There were lots of good filler panels. You just have to take the time to dismantle to get what you need. But the $ savings are worth it. Just be patient and try to avoid taking a sludgehammer approach to getting the parts off.

FYI, the filler panels and some interior trim is pretty much the same from 1980-1984 on most of the Olds lineups.
Not concerned with body parts they are all in great condition,even the chrome with no dings.My girl has just been sitting in the garage for 11 yrs now and the rear bumper filler has gotten dry and cracked with a little help from me.I was pulling out the gas tank,didnt take off the cap and it slipped and took out a small chunk of thr bumper filler right under the plate so over the yrs it has cracked more.Thats the only body parts i need.But in my younger yrs I redid the interior lowrider style and would like to change it back.All i need is headliner which i might just make myself and front and rear seats.Sigh......I should have never taken out that beautiful chocolate brown Brougham all original interior.
Old Jan 12, 2010 | 03:59 PM
  #4  
1low88's Avatar
Registered User
 
Joined: Jan 2010
Posts: 4
From: WInnipeg MB
Nice car to start. does it have hydraulics? those bumber filler are the only things i can find for the car (internet wise) ebay had them. its too bad u lived so far from me. i have the chocolate brown interior wanting to customize it for my lowrider!
Old Jan 12, 2010 | 04:23 PM
  #5  
henryk8398's Avatar
Hangin' out...
 
Joined: Dec 2008
Posts: 608
From: Scottsdale, AZ
If you need bumper fillers, try these guys:

www.autorifix.com

I ordered the rear side fillers, will let you know what the quality is when I get them. Should be here tomorrow!
Old Jan 12, 2010 | 04:51 PM
  #6  
Allan R's Avatar
Just an Olds Guy
 
Joined: Jul 2008
Posts: 24,528
From: Edmonton, AB. And "I am Can 'eh' jun - eh"
Originally Posted by henryk8398
If you need bumper fillers, try these guys:

www.autorifix.com

I ordered the rear side fillers, will let you know what the quality is when I get them. Should be here tomorrow!
That is a really cool link. Wish I knew about it back about 10 years ago.
Old Jan 13, 2010 | 09:44 PM
  #7  
henryk8398's Avatar
Hangin' out...
 
Joined: Dec 2008
Posts: 608
From: Scottsdale, AZ
Originally Posted by Allan R
That is a really cool link. Wish I knew about it back about 10 years ago.
I just got them today and I haven't test fitted them yet, but they look like good quality ABS reproductions. They are primered, but will need some sanding and more primer to make them smooth. Here is a picture:
Attached Images
File Type: jpg
HPIM1237.jpg (47.3 KB, 22 views)
Old Jan 14, 2010 | 12:22 AM
  #8  
OldsMotion's Avatar
OldsMotion
 
Joined: Nov 2006
Posts: 1,195
From: Liberty, NC
I have the corner fillers for that 84 Delta. Very good condition. $40 for the fronts, $40 for the rears, $75 for both sets, SHIPPED. I know you only need one, but you may find all of yours are junk.

Also have a line on a dark burgandy dash pad, crack free, one small blemish on the top. I had sold it to a friend of mine, but then found him the correct color he was looking for.

Pm me if interested.

John

Last edited by OldsMotion; Jan 14, 2010 at 12:29 AM.
Old Jan 14, 2010 | 11:08 PM
  #9  
DDTCM's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 7
From: Austin TX
How's about aome door panels anyone?
Old Nov 17, 2010 | 05:51 PM
  #10  
KustomRocket88's Avatar
"Kustomizer"
 
Joined: May 2010
Posts: 58
From: Maine
Talking

Originally Posted by 1low88
Nice car to start. does it have hydraulics? those bumber filler are the only things i can find for the car (internet wise) ebay had them. its too bad u lived so far from me. i have the chocolate brown interior wanting to customize it for my lowrider!

Thats awesome! You oughta post a picture of your car, I'd like to see it! I love seeing Deltas made into Lowriders! I'm going a 50s kustom, retro Lowrider theme myself!
Old Nov 18, 2010 | 12:35 PM
  #11  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
I have had over 10 of these deltas in my lifetime. I have all kinds of 80's delta stuff.
If you need the big long bumper valance under the license plate, I should have 3 or 4 of them.
None in brown though. Most likely blue.
Old Nov 18, 2010 | 03:23 PM
  #12  
KustomRocket88's Avatar
"Kustomizer"
 
Joined: May 2010
Posts: 58
From: Maine
Hey J-(Chicago), do you have any of those corner rear bumper filler panels? How much for ones in good condition? Don't care about the color.
Old Nov 19, 2010 | 10:28 AM
  #13  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
Originally Posted by KustomRocket88
Hey J-(Chicago), do you have any of those corner rear bumper filler panels? How much for ones in good condition? Don't care about the color.
Eightupman has a better deal than I'm offering. I'd like 60 shipped for a pair of the rears.
Old Nov 20, 2010 | 11:44 PM
  #14  
KustomRocket88's Avatar
"Kustomizer"
 
Joined: May 2010
Posts: 58
From: Maine
Eightupman - I'd be interested in the rear corner bumper filler panels. Now the $40 includes shipping?
Old Mar 1, 2011 | 08:10 AM
  #15  
Tennesseeolds's Avatar
Registered User
 
Joined: Feb 2011
Posts: 3
I found many parts at your local pull a part or you wrench it. Hope this helps
Old May 22, 2011 | 12:36 PM
  #16  
RenzyB's Avatar
Registered User
 
Joined: May 2011
Posts: 8
Does anyone have these rear valance fillers in blue? PM me.
Or even chrome exterior trims?
Thanks
Old May 24, 2011 | 03:55 PM
  #17  
Joseph Luchynsky's Avatar
Registered User
 
Joined: Apr 2011
Posts: 1
go to steele rubber .com
Old May 24, 2011 | 06:45 PM
  #18  
RenzyB's Avatar
Registered User
 
Joined: May 2011
Posts: 8
Originally Posted by Eightupman
I have the corner fillers for that 84 Delta. Very good condition. $40 for the fronts, $40 for the rears, $75 for both sets, SHIPPED. I know you only need one, but you may find all of yours are junk.

Also have a line on a dark burgandy dash pad, crack free, one small blemish on the top. I had sold it to a friend of mine, but then found him the correct color he was looking for.

Pm me if interested.

John
Do you still have these fillers?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
colinreilly
Ninety-Eight
2
Aug 12, 2015 02:31 PM
dgreen
Parts For Sale
30
Oct 18, 2012 06:17 AM
dyter19
Major Builds & Projects
1
Aug 9, 2012 08:40 PM
yeahbuddy
Electrical
9
Dec 19, 2011 08:40 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:43 PM.