control arm boxing kits...
#1
control arm boxing kits...
Hello from Germany,
anyone know where i can buy lower-control arm boxing kits for 64-67 A´s...
or any spacer because i wanted to use a swaybar (UMI-Performance) on not boxed arms.
denis
anyone know where i can buy lower-control arm boxing kits for 64-67 A´s...
or any spacer because i wanted to use a swaybar (UMI-Performance) on not boxed arms.
denis
#2
Hi and welcome to ClassicOldsmobile!!!!
I havent seen boxing kits for the 64-67 a body cars....
But you can upgrade your suspension with rear upper and lower arms from Edelbrock, BMR, Hotchkis, UMI .....
I replaced mine with some Non Adj. Upper and lower arms from UMI and they fit perfect....
they look nearly stock and you dont have the pain to press out that old worn rusty bushings.....
Greets from Nurnberg
Torsten
I havent seen boxing kits for the 64-67 a body cars....
But you can upgrade your suspension with rear upper and lower arms from Edelbrock, BMR, Hotchkis, UMI .....
I replaced mine with some Non Adj. Upper and lower arms from UMI and they fit perfect....
they look nearly stock and you dont have the pain to press out that old worn rusty bushings.....
Greets from Nurnberg
Torsten
#3
http://www.fusick.com/catalogdownload.htm Fusicks has them in their online catalog. These are good people to do business with.
#5
#7
.....thanks for the info guys
think i weld some spacers or brackets in it beacuse OPGI wanted over 100$ for shipping.
Hy Torsten freut mich,
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
PS. nice ride!
think i weld some spacers or brackets in it beacuse OPGI wanted over 100$ for shipping.
Hy Torsten freut mich,
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
PS. nice ride!
#8
.....thanks for the info guys
think i weld some spacers or brackets in it beacuse OPGI wanted over 100$ for shipping.
Hy Torsten freut mich,
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
PS. nice ride!
think i weld some spacers or brackets in it beacuse OPGI wanted over 100$ for shipping.
Hy Torsten freut mich,
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
PS. nice ride!
#9
Actually, the easy way to do this yourself is to first weld tubes across the bolt holes then weld flat plate to the bottom to make it a closed box.
But i couldnt get out these old rusty bushings......
So i decided to buy an aftermarket suspension package.
I had round steel spacers and the top plates cutted already but i dont wanted to twist the arms with the press.....
If you get the bushings out, that s the easiest way to make them "boxed"
Joe, you are the MAN!
Hy Torsten freut mich,
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
hab dich gerade zu meinem persönlichen übersetzter gekürt falls mich meine Englischsprachige Zunge im Stich läßt,dir scheint die Sprache besser zu liegen....was meinst du?
Ich helfe gerne wo ich kann, wenn du irgendwelche probleme hast, in bezug auf teile, addressen etc..... schreib mir entw. per email oder pm.
Mein English naja, i`ll do my best
I have to look in my dictionary once a day Shame on me, it was better a couple of years ago...
You have a nice looking cutlass, too.
Oldsmobile is rare in Germany (watch out for mercedes amg drivers)
Regards,
Torsten
Thread
Thread Starter
Forum
Replies
Last Post
oldzy
General Questions
5
December 19th, 2011 06:43 AM