Care and Appearance Washing, waxing, paint care products, etc.

What to use on OLD car

Thread Tools
 
Search this Thread
 
Old Nov 17, 2015 | 08:14 PM
  #1  
deaddds's Avatar
Thread Starter
Registered User
 
Joined: Sep 2009
Posts: 2,858
What to use on OLD car

I remember a post a year or so back on a guy that had found an original paint Olds from the 20s and cleaned it up using something I guess old motorcycles get cleaned with to preserve the patina? Does anyone know what this is? I'm trying to preserve the finish on my 19 but don't want to jack it up. Any ideas? Thanks
Old Nov 18, 2015 | 02:27 PM
  #2  
Magna86's Avatar
Registered User
 
Joined: Mar 2012
Posts: 1,257
From: Chesapeake, VA
A rubbing compound will bring back some of the shine and then a wax to protect it. Or you could just hand wax it and it will protect the finish.
Old Nov 18, 2015 | 02:40 PM
  #3  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,514
From: Poteau, Ok
Use a clay bar and good ol Maguires #7 show car glaze. It may take a lot of hand rubbing, but it works. Don't use compound because it will remove the paint.
Old Nov 18, 2015 | 06:01 PM
  #4  
Tedd Thompson's Avatar
Registered User
 
Joined: Oct 2004
Posts: 7,743
From: Forest Ranch Ca.
There is a oil type substance that is used to enhance aged old car paint and for the life of me I can't remember the name of said product but if you post this question on the AACA forum someone much smarter and with a better memory than me will undoubtedly have a answer for you.... lost in the fifties ...Tedd
Old Nov 18, 2015 | 07:27 PM
  #5  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,514
From: Poteau, Ok
That's what the Maquires has in it Tedd. I use it with a pile of microfiber cloths and it will bring the shine back. The clay bar takes the garbage off the top of the paint.
Old Nov 18, 2015 | 07:36 PM
  #6  
deaddds's Avatar
Thread Starter
Registered User
 
Joined: Sep 2009
Posts: 2,858
I was watching CCC and they had a 21 Stutz and the guy used a "metal protectant" to clean up the finish without messing up the patina. I guess its some kind of cleaner for the bare spots on the body. Does this trip any triggers?
Old Nov 22, 2015 | 07:32 AM
  #7  
Tedd Thompson's Avatar
Registered User
 
Joined: Oct 2004
Posts: 7,743
From: Forest Ranch Ca.
Deaddds, The product may have been Penetrol manufactured by the flood company. As I remember it was a wipe on wipe off process which would remove oxidation and protect and stop rust in any areas that had lost all the paint. I think it was applied with very fine steel wool.I'm not sure that is the product you are looking for but I believe that is what was used on the restoration of a antique motorcycle. There must be a youtube of it but I couldn't find it..... Tedd
Old Nov 22, 2015 | 07:45 AM
  #8  
lemoldsnut's Avatar
Registered User
 
Joined: Nov 2008
Posts: 3,345
From: Redmond, Oregon
a trick RV dealers use is Mop and Glo. Not sure about that on a car but if it has lots of petina to start with it won't hurt
Old Nov 22, 2015 | 12:57 PM
  #9  
deaddds's Avatar
Thread Starter
Registered User
 
Joined: Sep 2009
Posts: 2,858
I did get a message back from the guy that refurbished the Stutz on CCC and he used Gibbs metal wash. I will try it first. Figure if he will use it on a 6 plus figure car, I will try it on mine. Thanks for all the input.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1968_Post
Electrical
5
Aug 28, 2014 03:17 PM
JpMotorsports
Chassis/Body/Frame
10
May 15, 2014 07:08 AM
leeburch1
The Newbie Forum
6
Jan 31, 2012 09:28 PM
boondocker
Non-Olds Engines
9
Dec 10, 2011 06:06 AM
Biothree
The Newbie Forum
6
Jun 30, 2010 09:00 AM




All times are GMT -7. The time now is 06:37 AM.