Rockerpanels
Thread Starter
Registered User
Joined: Apr 2012
Posts: 267
From: Sykkylven,Norway
Rockerpanels
image.jpg
There was a lot of filler on my rockerpanels,this made me suspicious so I removed all of it.Down to bare metal.The panel are rustfree and straight ,but there is a high spot right below the soldering in the back of the doors.Where the X is in the picture.About the same on both sides.Seems like someone has put filler on to build the rest of the panel up to this high spot.
Wonder if this high spot is normal,if it is,did they leave it like this from factory.
Fantastisk.Picture is upside down.How do I fix it.
There was a lot of filler on my rockerpanels,this made me suspicious so I removed all of it.Down to bare metal.The panel are rustfree and straight ,but there is a high spot right below the soldering in the back of the doors.Where the X is in the picture.About the same on both sides.Seems like someone has put filler on to build the rest of the panel up to this high spot.
Wonder if this high spot is normal,if it is,did they leave it like this from factory.
Fantastisk.Picture is upside down.How do I fix it.
Last edited by jankyrre; Aug 31, 2014 at 01:05 PM. Reason: Picture
