Please help! I'm trying to find out if the windows had seals or were glued in. If they need seals for the window to be but back in does any one know where I can buy them at? I took the windshield out only to realize that it wasn't part of my kit. If you can find any information please let me know! Thanks!

 

The front and back glass uses a butyl tape type gasket. Its a sticky tar like roll that is placed down and comes with 2 rubber positioning blocks at the bottom of the glass. It comes in 3 sizes, 1/4 5/16 and 3/8. It does not squish much at all when the glass is set. I used the 5/16 for the front and 1/4 for the rear of my 67 442.

 

That's kind of like the tape used to hold the weather seal trim on 68-72 hardtop models. Only it's thinner and wider. My front and rear glass is held by butyl. They use better products nowadays.

 

I used 1/4" x 15 ft. front and back on my 66; 3M windo-weld, 051135 08610.

 

Where can I get this at and is it easy to put in?