ssbigken

Trying to install a hurst hood scoop on a 69 cutlass was needing factory specs for location on the actual hood ty all

oldcutlass

Have you tried some of the aftermarket suppliers that sell them and see if they have a drawing? I tried a search and could not come up with anything on the net.

ssbigken

Did not have a template ive searched many of spots with no luck was hoping some one on here had one I've only seen pics of a hurst but does not do justice for measurements

oldcutlass

I know you posted this 2 other times, hopefully one of the Hurst guys will chime in.

GoodOldsGuyDougie

First, do you mean a Cutlass S Hood?. The Scoop wont fit on a regular Cutlass Hood. They are different.

ssbigken

But I have a different hood out there Not sure if it was a supreme or not what diffences do I need to look for

firefrost gold

I can post some photo's and some numbers when I get home today. what are you putting it on and what are you looking to have when done ?

ssbigken

69 cutlass supreme but I read a post about hoods being differnt and I put a different hood on it Cant remember the model it came off of what differences are there that i need to look for? Just wanted a scoop on my hood cuz i need to cut a hole because my huge rise intake do i figured i would go with the hurst cuz I like the look and it looks factory of sorts

firefrost gold

19.1/4 inches from back of hood the the base of the mail box. The inlet hole is 5. 3/4' wide and 6 long.

firefrost gold

Center it in hood valley

firefrost gold

Underside look

GoodOldsGuyDougie

The Cutlass S hood and 442-(Same as H/O) Are the same. The 1969 Cutlass Supreme Hood is different and not compatible with 1969 H/O Scoop.

ssbigken

Are you referring to the under side as the mail box the part where all the air will be collecting the scoop o bought just has the front cowls no guts under it so I guess I'm needing the top side measurement as well like from nose cone to front of the center of cowl(how long the stripe would be) and im assuming its center from left to right ty for the help and the hood looks good I'm sure the rest of the car does too

firefrost gold

Mail box = scoop . Is a hurst olds running joke. The best place I could get a measurement that was a solid line was the back of the hood the scoop is angled and that is at the base where the hood and scoop meet.

ssbigken

Ok so that was the top of hood measurement ty again sorry for all the trouble I'll try to get that installed maybe have to fab it a bit since its the supreme model ty again

firefrost gold

I have seen them on all kinds of hoods from 68's to 70s so measure twice cut onece . Do post them up when done

GoodOldsGuyDougie

With enough Bondo you can do anything.

firefrost gold

Have you had the guts to drill the first hole ??

ssbigken

Plenty of guts but i threw my back out 3 weeks ago lol doing good to walk but as soon as I'm up to par I'll tackle it

firefrost gold

Good luck ������