Can you tell what these heads came off of?
#1
Can you tell what these heads came off of?
I bought a pair of heads today and was wondering if you guys could tell me what they came off of, the guy i bought them from said they came off a 69 442. they are c heads and the numbers on the exhaust side from left to right are; cfd 16 394 548 20 on one and the other is cfd 16 394 548 332. thanks
#5
No. If they have small intake valves (2.000") then they did NOT come off a 442, but why do you care? All big valve C heads (used from 1967 through 1969, by the way) are the same and came on 442s, Toros, and full size cars. The only functional difference would be the pushrod holes if they came off of a motor with a 45 deg lifter bank angle. And if they were from a 67, one of the heads would have an engine unit number stamped on one end.
#7
All big valve C heads (used from 1967 through 1969, by the way) are the same and came on 442s, Toros, and full size cars. The only functional difference would be the pushrod holes if they came off of a motor with a 45 deg lifter bank angle. And if they were from a 67, one of the heads would have an engine unit number stamped on one end.
Thread
Thread Starter
Forum
Replies
Last Post
Rocket Richard
Eighty-Eight
7
August 22nd, 2012 11:37 AM