Procomp heads valve sring pockets

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2018 | 12:25 PM

VinMichael

Thread Starter

Registered User

Joined: Mar 2011

Posts: 558

Procomp heads valve sring pockets

Looks to me like the springs are a little too close to the pushrod guideplate pads. Haven’t seen this topic come up before. I’m running 1.460” springs. Do I need to take these apart and start trimming or am I missing something. Thanks
https://imgur.com/gallery/pbTIg

Last edited by VinMichael; Feb 24, 2018 at 12:31 PM.

Feb 24, 2018 | 04:47 PM

cutlassefi

Registered User

Joined: Nov 2008

Posts: 8,477

From: Central Fl

You’re fine.

Feb 24, 2018 | 05:27 PM

Firewalker

Registered User

Joined: Mar 2014

Posts: 719

Quote:

Originally Posted by VinMichael

I see why you are concerned in your pictures, but doubt it is any real problem, but to be on the safe side once assembled on the full engine you can turn turn it over by hand to make sure, but I seriously doubt there will be one.

Feb 24, 2018 | 05:33 PM

VinMichael

Thread Starter

Registered User

Joined: Mar 2011

Posts: 558

Thanks guys there was a witness mark on the spring. I tried to capture that in the pics. So that’s why I was concerned. But if it’s not big deal I’ll gladly move on. As always thanks for the input.