Quadrajet advice jets/rods
#1
Quadrajet advice jets/rods
Hello all,
I recently had my 455 rebuilt .30 over with a mild cam upgrade.
I realize I now have to get into my quadrajet and play with the jets and rods. I am looking for all the experience out there on what size to start with and also what the stock sizes were for reference.
Carburetor 70229251
stock cam: 220/222 472/472 113LSA
new cam 224/234 496/520 112LSA
Thank you
Mark
I recently had my 455 rebuilt .30 over with a mild cam upgrade.
I realize I now have to get into my quadrajet and play with the jets and rods. I am looking for all the experience out there on what size to start with and also what the stock sizes were for reference.
Carburetor 70229251
stock cam: 220/222 472/472 113LSA
new cam 224/234 496/520 112LSA
Thank you
Mark
#4
I used cliff ruggles book and the tech paper by Lars off the Corvette forum it lists all the jet surface areas and rod thicknesses. I had the same problem on my 75 350 when I changed the heads , intake, cam and went dual exhaust. Ran way too lean. Get the good jets and rods.
Thread
Thread Starter
Forum
Replies
Last Post