Yacht Machanic

I'm in the part collection mode for rebuilding the 400 cu. in. E block motor for my 67 Cutlass/442. I have found stock type flat tappet lifters but no luck in finding a Hydraulic Roller lifter that measures .921. Can find roller cams that will work, but they all come with .842 lifters. My motor guy says that the tool to bush lifter holes is specific to the motor brand, which he only has SBC tool. Does anybody know of a source for .921 roller lifters or a shop in Florida that can bush my blocks lifter holes. Thanks.

oldcutlass

Will these work? Mark, cutlassefi might be a good guy to talk to also.
https://www.summitracing.com/parts/m...ake/oldsmobile

cutlassefi

Where in Fl are you?

Yacht Machanic

The Melling roller lifters that Summitt show on there web site are of the style that has a flat side to keep them straight in there bores. Won't work. I am on the west coast of Florida, near Clearwater. I seen some of the threads from Cutlassefi and would like to have a conversation with him. Thanks for the info.

oldcutlass

You can PM Mark, he will answer you back.