Boiler_81

Several years ago, someone posted plans for a rolling Oldsmobile engine storage cradle. I would now like to build a couple of these. I can't find the post now. IF someone would provide the drawing, I would certainly appreciate it.

CRUZN 66

For what it will cost to build one, these are a possible alternative...

http://www.jegs.com/i/JEGS+Performan...FVhbhgodE40CWw

http://www.summitracing.com/parts/su...FYdehgodcywLNw

https://www.google.com/search?q=engi...w2lpPCK32FM%3A

Mr Shifty Sidney

I could not find post either. I did capture information from post though. Hope this helps.

Don W

76olds

^^^^
I believe Don posted a sketch that Mdchanic (Eric) had drawn up for many of us to copy. Perhaps "Eric" will chime in on this if correct for Oldsmobile engines.

VI Cutty

I think you'll find all the reference material in this thread:

https://classicoldsmobile.com/forums...tand-sale.html

MDchanic

Yup, that's the thread.

It's easier to see when you post the image like this:



Sorry it took me a while to run into this - I was at work.

- Eric

Olds64

One could do the engine cradle on the cheap by using wood instead of steel tubing. Notice the wooden engine cradle on the last link posted by John.

Boiler_81

Thanks everyone