oldsmosteel

hi all, bought this 400 G block about a month ago.. still on the fence about rebuilding or reselling. if this is a cross drilled crank i might just keep it as i want to run a manual trans. is this what a cross drilled crank looks like?

thanks
Marty

Fun71

I thought I was gonna see a picture of the oil feed holes in the main journals.
Are you perhaps asking if the crank is drilled for a pilot bushing?

oldsmosteel

yes!

J-(Chicago)

looks like automatic only.

Octania

I'll say AT originally but looks lilke a 3-step drill, easy convert to MT use with the alternate bearing.

oldsmosteel

thanks. i'll look into that. i'm getting a smokin deal on a running '71 delta 88... 4bbl carb running 455 & turbo 400 trans. from the negs i've read about the 400 g blocks i might just let it go & keep the AT & 455 instead. pretty sure the 400G was an old Toro engine as it has the notch in the oil pan. so i'm thinking shouldn't be too hard to find a buyer for it.

Marty