cman442

Does anyone have a close up of what the orginal bolts looked like for the W27 cover?

ROCKET VAPOR

Repros for '70

https://www.ebay.com/itm/40444447345...Bk9SR7LXjc3QYg

cman442

Thanks but I know all about the repo's. That's why I asked if anyone had originals. Specifically, what would have been used on the 10 bold 71-72 cover.

briane

This photo is my 1970 W27. The bolts were procured from ILT, the hex flange head style and RBW with indent markings match my originals exactly (I had only 10 of the 12 originals). Although these were zinc plated while my originals appear to be cadmimum plated--doubtful anyone can tell. Unfortunately I don't believe ILT still has these.

cman442

Thanks!

briane

I should add that your '71-2 application could have used a different fastener, I just don't know. I didn't see your mention of that until after I posted the photo. However with no additional information I'd go with the 1970 data.

This 1970 factory photo unfortunately doesn't have high resolution. However, looking at the bolt in the 3 o'clock position appears to match my prior photo.

joesw31

The 71/72 W27 bolts are completely different from 1970. The 71/72 bolts are very difficult to find.

19684424speedconvertible

274474 part number on bag