deltsanddueces

can someone tell me where these green wires in this picture connect to? i can't find anywhere on the carb or intake where it would connect. the car is an '85 delta 88

Sugar Bear

It stays disconnected. It is a test point connection to measure the duty cycle of the mixture control solenoid.

deltsanddueces

cool thank you

joe_padavano

This is why you MUST read the tuning section of the factory Chassis Service Manual if you plan to do any work on these CCC cars. That test connector is provided so you can use a regular dwell meter (on the SIX cylinder scale) to monitor the mixture control duty cycle while adjusting the idle mixture screws.