jensenracing77

i think i all ready know but want to make sure. are the disc brakes the same from 68 to 72? i know they were differant in 67 but was not sure about 68.

2blu442

They will interchange, but my 1968 has the dual piston calipers and two piece rotors. I don't know if all 1968's had that setup though. John

wmachine

Yes, '67 and '68 have the 2-piston calipers. '69 was the first year for the much more common single piston design.

64Rocket

I have a complete '68 4 piston set up with the rotors, and I have the single piston set up also, but with no rotors. The question is, has anyone use the '68 rotors with the '69 and up set up?

Gene

wmachine

Since the 4 piston calipers are son prone to trouble, I don't know why anyone would want to do that. New single piston calipers are not that expensive.

jensenracing77

thanks everyone. i have a set of spindles off a 70 and may put them on a 68.

joe_padavano

One last note: The spindles from the 67-68 four piston calipers interchange with those from the 69-72 single piston calipers. Only the bolt-on caliper brackets are different.

Yellowstatue

My '69 Vista had two piece rotors and single piston calipers, I believe it was factory...I don't have any leakage problems since I had stainless sleeves installed in our four piston calipers... Single piston calipers are cheap but four piston are SEXY..