ClassicOldsmobile.com
0 2016/08/21 14:17:56
0 2016/08/23 16:28:07
0 2016/08/23 16:30:10
0 2016/08/23 16:48:29
Rollor setup was around $1000 at a lower power band than my cam at the time(might still be the same). I did install roller rockers(machine work on block and guide plates) with solid Ford pushrods(to specs) and not the weld on balls at the end. I remembered a rope seal(replaced) and stock standard oil pump Summit offered in their forged rebuild kits. I bought what ARP bolts or studs that I could use going back.
Rollor setup was around $1000 at a lower power band than my cam at the time(might still be the same). I did install roller rockers(machine work on block and guide plates) with solid Ford pushrods(to specs) and not the weld on balls at the end. I remembered a rope seal(replaced) and stock standard oil pump Summit offered in their forged rebuild kits. I bought what ARP bolts or studs that I could use going back.
0 2020/02/16 16:03:49
0 2020/02/17 06:47:30
0 2020/02/17 06:49:49
0 2020/02/17 06:52:08
Live on dirt roads(sucks) Buying the bling gets pricey
Live on dirt roads(sucks) Buying the bling gets pricey
0 2020/02/17 07:31:21
The rub marks on the tire from bumps and when people are in the back seat.
The rub marks on the tire from bumps and when people are in the back seat.
0 2020/02/17 07:34:19
It could use a bit more spacing bring the gauges closer the bezel.
It could use a bit more spacing bring the gauges closer the bezel.
0 2020/02/17 07:50:12
Should I buy another head bolt set due to them being torqued once going back and after break in(750mi).
Should I buy another head bolt set due to them being torqued once going back and after break in(750mi).
0 2020/02/18 18:25:57
0 2020/02/19 14:16:00
0 2020/02/19 14:19:58
Machine shop receipt I paid $500 towards the heads before he started(on another receipt).
Machine shop receipt I paid $500 towards the heads before he started(on another receipt).
0 2020/02/20 07:25:40
Crank grind receipt and getting it polished in 14 from setting around for 6yrs. Don't look at the wrong sized valve springs and probably everything else. These were recommended with my cam https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.summitracing.com/parts/cca-995-16/&ved=2ahUKEwiz5628y-DnAhVCAqwKHUjKBZoQFjACegQIBBAB&usg=AOvVaw0oLAFc-xabHtvYLowQHMw9
Crank grind receipt and getting it polished in 14 from setting around for 6yrs. Don't look at the wrong sized valve springs and probably everything else. These were recommended with my cam https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.summitracing.com/parts/cca-995-16/&ved=2ahUKEwiz5628y-DnAhVCAqwKHUjKBZoQFjACegQIBBAB&usg=AOvVaw0oLAFc-xabHtvYLowQHMw9
0 2020/02/20 08:46:47
0 2020/02/20 08:58:34
0 2020/02/24 21:35:09
0 2020/02/24 21:36:40
0 2020/02/24 21:38:54
0 2020/02/24 21:40:34
0 2020/03/04 08:31:17
0 2020/03/04 08:35:13
0 2020/03/04 10:20:23
0 2020/03/04 10:21:55
0 2020/03/13 06:59:30
First time I ever seen this!
First time I ever seen this!
0 2020/08/03 08:26:28
0 2020/08/04 10:41:06