ClassicOldsmobile.com
Chrome bead installed!
Chrome bead installed!
0 2023/07/06 19:29:16
All grounding strips in place with map/courtesy light harness
All grounding strips in place with map/courtesy light harness
0 2023/07/07 18:57:16
Cleaning up main dash/fuse block harness
Cleaning up main dash/fuse block harness
0 2023/07/07 18:57:28
Original GM label
Original GM label
0 2023/07/07 18:57:39
Idiot gauge pin out
Idiot gauge pin out
0 2023/07/07 18:57:49
Repositioned pin out for Rally gauge
Repositioned pin out for Rally gauge
0 2023/07/07 18:58:00
Pin out documentation from ClassicOlds Sticky
Pin out documentation from ClassicOlds Sticky
0 2023/07/07 18:58:03
Passenger side alignment
Passenger side alignment
0 2023/07/10 19:59:30
Driver side alignment
Driver side alignment
0 2023/07/10 19:59:44
Radiator mock up for bracket position
Radiator mock up for bracket position
0 2023/07/10 19:59:58
Good alignment
Good alignment
0 2023/07/10 20:00:10
Lower Brackets installed and painted
Lower Brackets installed and painted
0 2023/07/10 20:00:21
Radiator support installed along with new trans cooler lines
Radiator support installed along with new trans cooler lines
0 2023/07/18 16:28:33
Had to manipulate these lines to fit and clear oil filter and each other
Had to manipulate these lines to fit and clear oil filter and each other
0 2023/07/18 16:28:46
Break-in oil
Break-in oil
0 2023/07/18 16:28:57
NOS AC Delco plugs
NOS AC Delco plugs
0 2023/07/18 16:29:11
Beautiful Gardner Exhaust
Beautiful Gardner Exhaust
0 2023/07/18 16:29:25
Great fitment and awesome chrome tips. If you look closely you can see the heater core clamped on the passenger side radiator support
Great fitment and awesome chrome tips. If you look closely you can see the heater core clamped on the passenger side radiator support
0 2023/07/18 16:29:43
0 2023/07/18 16:30:01
Test Stand: oil pressure and water temperature did not require battery power. I used the factory engine harness and battery cables with the horn relay as a connection point to supply power to the starter solenoid and coil.
Test Stand: oil pressure and water temperature did not require battery power. I used the factory engine harness and battery cables with the horn relay as a connection point to supply power to the starter solenoid and coil.
0 2023/07/19 19:30:24
Heater core included in the cooling system test and 5 Gallon gas can provided fuel to the fuel pump
Heater core included in the cooling system test and 5 Gallon gas can provided fuel to the fuel pump
0 2023/07/19 19:30:35
Tried this option first and had a pinhole leak. Wondering if a better application of this a second will do the trick
Tried this option first and had a pinhole leak. Wondering if a better application of this a second will do the trick
0 2023/07/25 08:03:03
Wondering if it is best to just use a gasket alone to seal the imperfections in the cast iron manifold and aluminum housing
Wondering if it is best to just use a gasket alone to seal the imperfections in the cast iron manifold and aluminum housing
0 2023/07/25 08:03:13
Have had good success with Type 3 Aviation seal on the engine and wonder if this is the best option to maintain a seal with temperature and pressure
Have had good success with Type 3 Aviation seal on the engine and wonder if this is the best option to maintain a seal with temperature and pressure
0 2023/07/25 08:03:22
After initial break-in time, plugs showed overly rich mixture.
After initial break-in time, plugs showed overly rich mixture.
0 2023/07/29 20:30:46
Emory smooth thermostat housing
Emory smooth thermostat housing
0 2023/07/29 20:31:00
Initial 71/1000” jets
Initial 71/1000” jets
0 2023/07/29 20:31:12
New 69/1000” jets
New 69/1000” jets
0 2023/07/29 20:31:23
Flatline sound deadening front
Flatline sound deadening front
0 2023/07/29 20:31:39
Flatline sound deadening back seat
Flatline sound deadening back seat
0 2023/07/29 20:31:59
Mocked up intake manifold gaskets with crossover blocking plates
Mocked up intake manifold gaskets with crossover blocking plates
0 2024/06/26 17:54:03
NOS GM #400165 AT cam
NOS GM #400165 AT cam
0 2024/06/26 17:54:11
Dealer order date 10/30/85
Dealer order date 10/30/85
0 2024/06/26 17:54:19
NOS GM cam
NOS GM cam
0 2024/06/26 17:54:28
NOS GM cam installed
NOS GM cam installed
0 2024/06/26 17:54:38
Missing oil pump rod retainer with missing teeth
Missing oil pump rod retainer with missing teeth
0 2024/06/26 17:54:41
Mondello cam removed
Mondello cam removed
0 2024/06/26 17:54:51
Restored grills, buckets, bezels and new bulbs
Restored grills, buckets, bezels and new bulbs
0 2024/09/19 19:34:44
Holes drilled on right
Holes drilled on right
0 2024/09/19 19:34:52
0 2024/09/19 19:35:01