ClassicOldsmobile.com
rings already gapped per cylinder
rings already gapped per cylinder
0 2018/08/30 17:53:05
balancer
balancer
0 2018/08/30 17:53:12
oil pan bolts
oil pan bolts
0 2018/08/30 17:53:15
0 2018/08/30 17:53:24
some nice stamp work on the mains Mark Hedrick did while doing the machine work @ Horsepower by Hedrick
some nice stamp work on the mains Mark Hedrick did while doing the machine work @ Horsepower by Hedrick
0 2018/08/30 17:53:27
0 2018/08/30 17:53:33
Internally balanced, heavy metal slugs added and polished
Internally balanced, heavy metal slugs added and polished
0 2018/08/30 17:53:36
0 2018/08/30 17:53:40
some more nice stamp work for torque setting for main bolts Mark Hedrick did while doing the machine work @ Horsepower by Hedrick
some more nice stamp work for torque setting for main bolts Mark Hedrick did while doing the machine work @ Horsepower by Hedrick
0 2018/08/30 17:53:43
2 piece rear main seal
2 piece rear main seal
0 2018/08/30 17:53:48
0 2018/09/03 13:17:51
0 2018/09/03 13:17:55
0 2018/09/03 13:17:59
0 2018/09/03 13:18:03
0 2018/09/03 13:18:08
0 2018/09/03 13:18:11
0 2018/09/03 13:18:15
0 2018/09/03 13:18:21
0 2018/09/03 13:18:23
0 2018/09/03 13:18:26
0 2018/09/03 13:18:31
0 2018/09/03 13:18:35
0 2018/09/03 13:18:39
Block cleaned and wiped down
Block cleaned and wiped down
0 2018/09/03 13:20:46
freeze plugs went in very easy, small amount of goop per plug
freeze plugs went in very easy, small amount of goop per plug
0 2018/09/03 13:21:01
setting the main caps into the block
setting the main caps into the block
0 2018/09/03 13:21:30
close up of the main bearings
close up of the main bearings
0 2018/09/03 13:21:46
crank is in
crank is in
0 2018/09/03 13:22:11
main caps and bearings installed
main caps and bearings installed
0 2018/09/03 13:22:30
2 piece rear main seal...offset to avoid the seams in parallel. Also added a small amount of goop/sealer to ensure the 2 piece joins and seals
2 piece rear main seal...offset to avoid the seams in parallel. Also added a small amount of goop/sealer to ensure the 2 piece joins and seals
0 2018/09/03 13:24:38
as mentioned this is # 1 and you can see the protrude I was speaking about. The tangs are alined and crank moves freely.
as mentioned this is # 1 and you can see the protrude I was speaking about. The tangs are alined and crank moves freely.
0 2018/09/03 13:26:13
Melling HV oil pump and pickup installed.
Melling HV oil pump and pickup installed.
0 2018/09/03 13:26:32
another view w/ oil pump
another view w/ oil pump
0 2018/09/03 13:26:53
Oil pan needed to be aligned so iIput it on just enough to get some thread engagement. It will sit like this for now
Oil pan needed to be aligned so iIput it on just enough to get some thread engagement. It will sit like this for now
0 2018/09/03 13:27:26
tucked away dafe and sound for now LOL
tucked away dafe and sound for now LOL
0 2018/09/03 13:27:47
you can see here, went in too far from having too much goop to slide in. took it out and back on the stand it went. Order already placed to summit racing.
you can see here, went in too far from having too much goop to slide in. took it out and back on the stand it went. Order already placed to summit racing.
0 2018/09/03 13:35:12
0 2018/09/06 17:04:37
0 2018/09/06 17:04:42
0 2018/09/09 05:23:53
0 2018/09/09 05:23:55