Muncie I.D.
Thread Starter
Registered User
Joined: Mar 2007
Posts: 3,446
From: eastern MA
Muncie I.D.
I have what I believe to be a Muncie 4spd. but was looking for more clarification on the code. I located PO122 on my trans where the I.D. numbers are supposed to be located. I bought this for a 4spd conversion on my 71 442.
What do I have? What is correct for 71?
What do I have? What is correct for 71?
Registered User
Joined: Jul 2008
Posts: 5,507
From: Seneca Falls, NY
"Serial numbers from 1963 to 1966 included only the month and day. P0101 would indicate January 1st.",
So your's would be Jan 22.
Is the countershaft 7/8" or 1"?
Later Muncies used a letter designation for the production month
It would help to have the case casting numbers too
Last edited by allyolds68; Apr 3, 2013 at 09:34 AM.
Registered User
Joined: Dec 2011
Posts: 7,286
Sounds about right.
Get all the casting ID's and google Muncie ID- lots of info out there summarized.
After 1968 there should be a VIN stamp also, tell exactly what vehicle it was in- make, year, and sequential number- but perhaps not the exact model- unless that certain VIN only came on one model- like a Corvette maybe. You can rule out Toronado I guess...
PO122
P for Muncie - go figure.
the rest, my memory fails me on, perhaps day 122 of 1970, or day 012 of 1972?
That's what the trans info sites are for.
Get all the casting ID's and google Muncie ID- lots of info out there summarized.
After 1968 there should be a VIN stamp also, tell exactly what vehicle it was in- make, year, and sequential number- but perhaps not the exact model- unless that certain VIN only came on one model- like a Corvette maybe. You can rule out Toronado I guess...
PO122
P for Muncie - go figure.
the rest, my memory fails me on, perhaps day 122 of 1970, or day 012 of 1972?
That's what the trans info sites are for.
Registered User
Joined: May 2009
Posts: 1,393
From: Austin, Tx
Sounds about right.
Get all the casting ID's and google Muncie ID- lots of info out there summarized.
After 1968 there should be a VIN stamp also, tell exactly what vehicle it was in- make, year, and sequential number- but perhaps not the exact model- unless that certain VIN only came on one model- like a Corvette maybe. You can rule out Toronado I guess...
PO122
P for Muncie - go figure.
the rest, my memory fails me on, perhaps day 122 of 1970, or day 012 of 1972?
That's what the trans info sites are for.
Get all the casting ID's and google Muncie ID- lots of info out there summarized.
After 1968 there should be a VIN stamp also, tell exactly what vehicle it was in- make, year, and sequential number- but perhaps not the exact model- unless that certain VIN only came on one model- like a Corvette maybe. You can rule out Toronado I guess...
PO122
P for Muncie - go figure.
the rest, my memory fails me on, perhaps day 122 of 1970, or day 012 of 1972?
That's what the trans info sites are for.
Think it's Jan 22nd. It's a 66 or earlier Muncie. No year indication in the stamped date code until 67 model year.
Henry
Thread
Thread Starter
Forum
Replies
Last Post
