edelbrock 1406 carburetor
#1
edelbrock 1406 carburetor
I have a rebuilt 330 hi compression engine with a slightly bigger cam and .030 over pistons.
I have a Edelbrock 1406 / 600 cfm carburetor and seems to be running a little rich.
I have the stock jets, metering rods and springs. Has anyone tuned or setup their carburetor other than stock?
what jets or metering rods are being used? I have the 330 in a '67 Cutlass convertible, stock intake and exhaust manifolds, 200 4R transmission with a/c.
I have a Edelbrock 1406 / 600 cfm carburetor and seems to be running a little rich.
I have the stock jets, metering rods and springs. Has anyone tuned or setup their carburetor other than stock?
what jets or metering rods are being used? I have the 330 in a '67 Cutlass convertible, stock intake and exhaust manifolds, 200 4R transmission with a/c.
#2
I have a rebuilt 330 hi compression engine with a slightly bigger cam and .030 over pistons.
I have a Edelbrock 1406 / 600 cfm carburetor and seems to be running a little rich.
I have the stock jets, metering rods and springs. Has anyone tuned or setup their carburetor other than stock?
what jets or metering rods are being used? I have the 330 in a '67 Cutlass convertible, stock intake and exhaust manifolds, 200 4R transmission with a/c.
I have a Edelbrock 1406 / 600 cfm carburetor and seems to be running a little rich.
I have the stock jets, metering rods and springs. Has anyone tuned or setup their carburetor other than stock?
what jets or metering rods are being used? I have the 330 in a '67 Cutlass convertible, stock intake and exhaust manifolds, 200 4R transmission with a/c.
#4
Here is a link to the owner's manual. I will discuss how to tune the carb to your application.
http://www.edelbrock.com/automotive/...404_manual.pdf
John
http://www.edelbrock.com/automotive/...404_manual.pdf
John
Thread
Thread Starter
Forum
Replies
Last Post