jimjr

Hi, I've been away from the site for a a while, but spring has sprung and it's time to get to work on the '67 Cutlass. Does anyone recommend a Boston, MA area shop to do a rebuild on my '67 330 C.I. H.O. motor? Both front and rear main seals leak and I know compression isn't where it should be. I figured I'd pull the motor, send it to a shop for a rebuild and mods., then utilize the extra elbow room to rebuild the front end and possibly do power disc brakes while I'm at it (budget-permitting, of course!). Any info. and/or advice would be greatly appreciated. Thanks and Happy Motoring!!! Jim

My442

ABT Machine in Holliston, MA.

Been there 30+ years.

Top quality work, good pricing, and easy to work with.

They also have an engine dyno too.

Ask for Mike (owner)

I have had 5 engines done by them, and all have been great.

jimjr

Were any of the engines the 330 H.O. ? If so, any advice on performance upgrades ?

My442

They did 3 BB Chevy engines, and 2 455 Olds engines.

If the car is a cruiser, I would suggest some mild head work, balancing, and good parts.

Sea five

not sure what part of Boston your at but Malden Machine Malden MA. is also very good

allyolds68

Custom Automotive Machine in Weymouth did mine. I was very happy with the job they did.