When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking for nice shoulder harness reel covers that mount up on the headliner for a 76 442. Light saddle would be nice but will take any color in good condition. Also I need nice seat belt sleeves for the same car with swivel buckets, they should be about 15 1/2 to 16 inches long. It is hard to accurately measure with the dogleg in the sleeve. The Strato buckets use a shorter sleeve at 14 inches long that allows the buckle to flop over and not stand up straight. I've got three sets of those. I need the longer pieces, light saddle preferred but any color in good condition considered. Thanks for any help you can provide.
Are the ones you need 1976 only? I believe I've got some from 1974 or 75 with swivel buckets. Anything I can measure or check to see if they'll work?
John
74 to 77 on the shoulder harness reel covers and 73-76 on the seat belt sleeves but they must come from a swivel bucket car or they will be too short. I can buy the whole female swivel bucket seat belt end if you don't want to sell sleeve separately and would even buy the whole swivel bucket shoulder harness set up with floor retractors if they are in working condition with intact belts. The sleeves I need are just about 16 inches long and the whole belt with sleeve is about 18 inches. Picture shows better than I can type it. Sorry it's so small it the only pic I have on this computer of what I need. Thanks for any help you can provide.
Also any GM A body cousin to the Cutlass with swivel buckets 73-77 will work. Pretty sure some 77 Monte Carlos still got swivel buckets.
Last edited by texxas; January 27th, 2017 at 07:04 PM.
OK, I'll get some pictures for you on Saturday. I believe I have the female ends that you showed the picture of. Then the retractors for the waist and also roof, the plastic covers for the roof retractors. These are black and I believe its the date code of 1974. I'm pretty sure I pulled these from a swivel bucket seat car. I know I've got some tan pieces somewhere that came out of a 1977, but I think the plastic on those may be breaking down. These black ones look good. John
I've got a set of light saddle shoulder retractor covers from a '76 Y76 Cutlass (large qtr window) in nice shape...albeit, a little sun faded. I'll get you pics and part numbers from the backs tomorrow if interested.
Last edited by crimsoncolby; January 27th, 2017 at 09:04 PM.
John, thanks I'll be looking out for pictures. And Colby yes I am interested in those light saddle pieces as well as long as they are not chipping or flakey, sunfaded is not a problem.Part #s and pics is great. Thanks guys.
These have the plastic clips molded into the backsides for attaching the flaps. Do your's not have those? I do know from picking parts from various "73-'77 GM "A" bodies that several styles of covers were used. Anyway, here are the pics:
These have the plastic clips molded into the backsides for attaching the flaps. Do your's not have those? I do know from picking parts from various "73-'77 GM "A" bodies that several styles of covers were used. Anyway, here are the pics:
crimson , never knew there were 2 different styles of these . Thought they were all the same .
Here's the seat belt parts I've got. They don't have the correct roof retractor covers. But may have the correct female connectors with sleeves. Please check out the photos and let me know if these are correct for your application. Not positive my memory is correct on what I removed these from! John
January 27th, 2017, 11:46 AM
my part numbers are 
