1976 Delta 88 coupe part out
#1
1976 Delta 88 coupe part out
I bought this as it is photograhed, an aborted project.
no interior parts, grilles bumpers taillights.
bone stock 350 runs well. Th375 trans
doors shaved with poppers
custom steering column.
I have trunklids
contact wth needs, thanks Jim.
Poconos,Pa
no interior parts, grilles bumpers taillights.
bone stock 350 runs well. Th375 trans
doors shaved with poppers
custom steering column.
I have trunklids
contact wth needs, thanks Jim.
Poconos,Pa
Last edited by bigdooly; March 5th, 2018 at 07:10 PM. Reason: ?????
#3
Column
It is a nice column, I don't think I will be utilizing it, as my tilt column is fine.
I have not had time to thoroughly examine it, as I only brought this car home this passed Friday.
I is either an Ididit, or a Flaming river, with ignition delete.( No provision for key tumbler)
the car has a push button start set up.
I can tell you I sold a non tilt column from a 75 delta on ebay, the guy who bought it said it fit in his 82 delta but wiring different.
The older cars have Hi- beam switch on floor, not on directional. And if I recall from my 85 Lesabre, the cruise, if so equipped & wipers are also on the column, whereas The 70's cars are on the dash.
So, you would have to figure all that out.
I will basically be selling everything but the posi rear that is in it, and maybe I will keep the doors. No tumbler/ ignition delete
I have not had time to thoroughly examine it, as I only brought this car home this passed Friday.
I is either an Ididit, or a Flaming river, with ignition delete.( No provision for key tumbler)
the car has a push button start set up.
I can tell you I sold a non tilt column from a 75 delta on ebay, the guy who bought it said it fit in his 82 delta but wiring different.
The older cars have Hi- beam switch on floor, not on directional. And if I recall from my 85 Lesabre, the cruise, if so equipped & wipers are also on the column, whereas The 70's cars are on the dash.
So, you would have to figure all that out.
I will basically be selling everything but the posi rear that is in it, and maybe I will keep the doors. No tumbler/ ignition delete
Last edited by bigdooly; February 14th, 2018 at 01:35 PM. Reason: typo
#5
Column
[QUOTE=C-Lock85BroLife;1075413]
Looks really good how much are you asking for
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
#6
[QUOTE=bigdooly;1075571][QUOTE=C-Lock85BroLife;1075413]
Looks really good how much are you asking for
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
#7
[QUOTE=C-Lock85BroLife;1076575]
not sure, I will check it out and get back to you
[QUOTE=bigdooly;1075571][QUOTE=C-Lock85BroLife;1075413]
[/QUOTELooks really good how much are you asking for
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
not sure, I will check it out and get back to you
#8
[QUOTE=C-Lock85BroLife;1076575]
[QUOTE=bigdooly;1075571]
It Is neither, it is triple nickel plated steel, according to manufacturer.
Looks really good how much are you asking for
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
I was trying to determine exactly what it is, to put a value on it. I can't see any numbers or any name on it.
I did find some paperwork from ididit, and talking to the company, I believe it is part # 1540769920, it is a custom column, 1970-1977 b body gm. Also had a new neutral safety switch on it, also from Ididit.
The suggested retail price is over $1000 for this column, I seen them selling around $750, & up. I would want $500 and the shipping. I don't thint the car was ever acually driven since the column was installed, It is basically in like new condition.
Is it stainless steel, Or aluminum? Looks like stainless.
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
General Discussion
8
April 9th, 2018 10:15 PM