When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi All
Its been a busy summer and some days too hot to work outside in the afternoon. But I've got some parts cars that I need to finish dismantling and make go away. This thread is for the 1954 Olds 88 two door hardtop. I've listed some parts with prices, anything specific let me know and I'll post pictures here or through email or PM as requested.
Rear bumper $150
Front Bumper $100
Grill Bar $100
Front Fenders $125 & 175
Doors $125 each, bare
Drivers side quarter panel $350
Do you by any chance have the steering wheel. I don't need the horn button. I need to redo my steering wheel and if I had an extra I could just redo it and then swap them out. I could also use the turn signal yoke if it isn't broken since mine do not cancel. If you have either of these send me a pm with the price.
any trim clips for the front? How much for the vent windows?
Doug, there's one other person in front of you for the vent window parts. If he passes I'll let you know. Which clips do you need on the front? The stainless lower/front on the fenders or some other area?
Do you by any chance have the steering wheel. I don't need the horn button. I need to redo my steering wheel and if I had an extra I could just redo it and then swap them out. I could also use the turn signal yoke if it isn't broken since mine do not cancel. If you have either of these send me a pm with the price.
Thanks
Glenn
Glenn, I don't remember if I sold the steering wheel already or not. But I'll dig around the garage to see if I can come up with it. I know I sold the one from the 1955 to ranmat a few years ago. But as I think about it I believe I do have the 1954 still. I'm putting together a crate to ship to Australia with 1954-55 parts. Corey (flatoz) was interested in the column for spare parts, if you want to check with him on the turn signal yoke it will likely be a couple weeks or more before I'm ready to ship. John
John,
Correct clips for the front stainless lower and hood lip. The previous bodyshop tossed all of them.
Doug
need hood lip, and stainless on lower bumper clips/fasteners<br/>
Let me see how many I can removed and will be good enough to re-use. You might create a thread asking if anyone has a source for new or reproduction ones
Hi Doug
I only had two clips on the hood, and at least five broken ones on the fenders. But here's some pictures of what I do have. Let me know if you want them or just good pictures to know what to buy to replace them. John
I've got two mor e of these. But this design looks like clips I've used in 1960's-70's vintage cars.
This is the clips with the clipped flat washer on the other side. <br/>
John,
Thanks for the pics! Nothing like going in blind on this now, that'll help! Good thing the 88 & 98 front's are the same. I did take your advse and posted a wanted ad, but i'd be interested in your clips.
Doug
John,
Thanks for the pics! Nothing like going in blind on this now, that'll help! Good thing the 88 & 98 front's are the same. I did take your advse and posted a wanted ad, but i'd be interested in your clips.
Doug
Hi Doug
I haven't come up with anymore clips. But if you want these send me a PM or email with your shipping address and I'll send you a price with shipping included. I may also have some additional photos of the clips on the body if that would help you identify what goes where. Just let me know and I'll post the pictures. John
thank you , I just need the connecting rods I will be using them to make shelf brackets for my work bench.
OK, I can remove the pistons before shipping. Send me a PM with your shipping address and I'll get a price for you including shipping costs. Are you wanting all 8?