Looking for a sending unit for a 67 442; the trick seems to be finding one for a four speed A/C car. Also looking for red OEM looking floor mats for same. Please reply to cincyrick67

 

Which sending unit, oil or temp? Any of the aftermarket suppliers, OPGI, Yearone, Fusicks, etc... should have mats. Red may be tough on the rubber ones.

 

None of the above. The fuel tank sending unit and float. Thanks for the info on the mats. Much appreciated.

 

Rockauto or your local auto parts store should have a sending unit. Rock auto has a 3/8ths both with and without return line.

 

The sender for a 4spd AC car is no different than a 442 in general for 67 as they all had the return line. The plain Cutlass F85 330 v8 car did not have the return line unless they had AC. I only know factory style rubber mats reproed in black and no other colors.

 

I wasn't sure about the fuel return line, but they list both.

 

Thanks for the feedback; I was told by a couple sources (including Fusick) it had a different unit.

 

Hey Rick
Call Bruce at Bobs Speedometer Shop in Brighton Michigan.
I spoke to him about your dilemma.
He can fix it an calibrate it.
Ill put in a word if you want.
You will be De Horsed for a little bit.
Ron Roth
Your Murder City Connection.

 

Saw a guy at the swap meet in Springfield with a set of dark red rubber mats still in the box. he wanted $350 for them. I didn't need them that bad. If you do PM me and I'll give you his phone number.

 

 

Cool, where would this place be? Thanks Ron.

 

 

$350? No thanks, I only need one set. Yeah, sure. If you have his number, please forward it to me. Thanks.

 

I dont see the proper one in the Fusick catalog. The proper one would have a 3/8 fuel line with return line. I got mine repro off EBAY and seems to be fine.

 

 

Thanks for confirming that's what I need. Do you know if any of the other GM A bodies units will work?

 

They have this at Rockauto Part # FG88E for $39.89:

 

Yes, Chebby ones should be the same and the repops are inexpensive.