I'm searching for A/C rectangle flex duct for my 69 442. Duct is about 2 X 2 1/2 inches. I need about 18 " .
Thanks for any help locating
Jerry

 

NAPA sell's that if you are just looking for FIT??

Johnny

Sorry,I just reread your post, NAPA sell's the round.

 

I may have to go the round duct if that’s all I can find, but I’m hoping someone here can help me locate the “rite stuff “
thanks for your suggestion
Jerry

 

Driver or passenger side? I have a few of the passenger side left.
Call me?
Scott
317-727-7041

 

It’s the Dr side I need but if the pax side is the same size I may cut what I need from it. Is what you have approx 2 x 2 1/2 inches?
Your price please pm me here
Thanks
Jerry

 

The driver side is much longer than the passenger side.

 

Actually the passenger side is the longer one. I may have one driver side left and I will try to check tomorrow.

 

I was about to comment that my pax side is considerably longer than the needed dr side.
Oldspacrat please let me know if you can help me out.

 

The flex hose on our '68 is longer on the driver side.

 

On my 69 442 the pax side duct is aprox. 9-10 inches longer than the dr side My car is factory A/C.

 

Our '68 is factory A/C also. I just replaced the driver side flex duct from one factory A/C car to another . The passenger side has a long round solid tube from the middle plenum to the right side outlet with a little shorty rubber joiner at the plenum and the solid tube is rectangular at the outlet end that snaps onto the outlet. We are going to have to resort to actual pictures later.

 

Yours with that plastic tube is the first design and much more rare than the actual flexible ducts. That explains why you said what you did and you would be a hundred percent correct. I did not even think about that.

 

My second 69 442, I will try to get that duct out tomorrow and get pictures for you. Sorry for the delay I've been covered up.

 

Sorry for the delay I've been covered up.[/QUOTE]
Blankets??

 

There is a right hand flex duct on e-bay right now.

 

Thanks for the help/suggestions. I've located and purchased the ducts that I need from this site and a facebook seller. Now only waiting to receive them.