Wanted: Misc Cutlass parts/exhaust manifold

Thread Tools
 
Search this Thread
 
Old May 5, 2010 | 07:02 PM
  #1  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
Wanted: Misc Cutlass parts/exhaust manifold

Hi all, I am looking for the following parts for my 71 Supreme:

Rear bumper bracket bolts (4) -the ones that attach the bracket to the frame.
Two body mounts - don't have to be new, just good
Trunk light w/ wire connector
Floor courtesy lights w/wiring
Right side exhaust manifold for a 350 with only one exhaust outlet.

Thanks!
Old May 6, 2010 | 11:04 AM
  #2  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
I have the passenger side manifold for a 69.
There isn't a pass. side manifold that doesn't have 2 outlets that I know of, except for toronados. They just capped off the bottom one.
Maybe you mean the W/Z's? Those cost a few bucks.
Here's a link for you.
http://www.ramairrestoration.com/cat...ad887b05f1cb9b

You can have this masterpiece for $25+ship
Attached Images
File Type: jpg
6969.JPG (65.0 KB, 128 views)
Old May 6, 2010 | 11:08 AM
  #3  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
I should also have your bumper brackets and 2 body mounts. Shoot me a pic of what the brackets should look like, and I'll look in the pile o brackets out back.
Old May 6, 2010 | 05:27 PM
  #4  
Cameo White's Avatar
Registered User
 
Joined: Oct 2008
Posts: 644
From: Chicago, IL
Smile

I think I have a couple of NOS body mounts (application unknown) from a parts box I picked up a while back. Got a pic of what the ones you are looking for should look like?
Old May 6, 2010 | 06:39 PM
  #5  
MJAKS462's Avatar
Registered User
 
Joined: May 2008
Posts: 356
From: Minnesota
Originally Posted by OLD SKL 69
Hi all, I am looking for the following parts for my 71 Supreme:

Rear bumper bracket bolts (4) -the ones that attach the bracket to the frame.
Two body mounts - don't have to be new, just good
Trunk light w/ wire connector
Floor courtesy lights w/wiring
Right side exhaust manifold for a 350 with only one exhaust outlet.

Thanks!
PM sent yesterday.
Old May 6, 2010 | 08:00 PM
  #6  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
I have the passenger side manifold for a 69.
There isn't a pass. side manifold that doesn't have 2 outlets that I know of, except for toronados. They just capped off the bottom one.
Maybe you mean the W/Z's? Those cost a few bucks.
Here's a link for you.
http://www.ramairrestoration.com/cat...ad887b05f1cb9b

You can have this masterpiece for $25+ship
Thanks for the offer, that's what I have now. I did not know that the "w/z" manifolds were difficult to find or expensive. I just wanted to get rid of the "cap".
Old May 6, 2010 | 08:09 PM
  #7  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
I think I have a couple of NOS body mounts (application unknown) from a parts box I picked up a while back. Got a pic of what the ones you are looking for should look like?
The ones I would like to replace are the two furthest back in the car behind the rear bumper. I have not taken them out yet so I don't have a picture, but I don't think their anything special.

I should also have your bumper brackets and 2 body mounts. Shoot me a pic of what the brackets should look like, and I'll look in the pile o brackets out back
Thanks J. My brackets are fine, I was looking for the original mounting nut and bolt assembly. (need all 4 nuts/bolts)
Old May 6, 2010 | 10:41 PM
  #8  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
Originally Posted by OLD SKL 69
Thanks for the offer, that's what I have now. I did not know that the "w/z" manifolds were difficult to find or expensive. I just wanted to get rid of the "cap".
The W/Z are for a 455, but you could probably make them work. I'd ask around on the site here.
I had 350 manifolds on my 455 in high school. It was restrictive, but it was a cruiser and not a racer, so no big deal there.
Old May 11, 2010 | 08:30 PM
  #9  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
Anyone have the parts I am looking for?
Old May 11, 2010 | 08:45 PM
  #10  
olds455's Avatar
Registered User
 
Joined: Mar 2009
Posts: 65
From: Anchorage Ak
I have this right side manifold #398704rh It just came off my 70 350 car that had a 403 in it. I went big block. It does have thw two outlets with one blocked off. Let me know if you need a pic.
Old May 12, 2010 | 08:22 AM
  #11  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
Originally Posted by olds455
I have this right side manifold #398704rh .
He's looking for one of those old cop car 330 RH manifolds.

1965 12 561796 330


Good luck. You may never find one.
Old May 12, 2010 | 10:53 AM
  #12  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
Ok, I won't worry about the rhs exhaust manifold. How about the 2 rear most body mounts, 4 carriage bolts and nuts (that attach the rear bumper brackets to the frame), trunk light and inside floor courtesy lights?
Old May 18, 2010 | 08:58 AM
  #13  
OLD SKL 69's Avatar
Thread Starter
GM Enthusiast
 
Joined: Jan 2007
Posts: 3,982
From: Long Island, New York
ttt
Old Feb 1, 2015 | 08:29 PM
  #14  
allen_442's Avatar
Registered User
 
Joined: Jun 2010
Posts: 20
Originally Posted by J-(Chicago)
He's looking for one of those old cop car 330 RH manifolds.

1965 12 561796 330


Good luck. You may never find one.
I know this is a very old post but that's depressing, l used to have 2 but sold one at a swap meet about 10 years ago for $35.00. Wish I would have kept it I didn't think I would ever need two. Here's the one I still have.
Attached Images
File Type: jpg
IMG_20150201_152016_247.jpg (66.4 KB, 19 views)
File Type: jpg
IMG_20150201_152033_871.jpg (59.0 KB, 16 views)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Del70
General Discussion
9
Aug 9, 2013 03:40 AM
atkinsom
General Discussion
7
May 29, 2013 06:39 PM
twintracks
Parts Wanted
5
Jun 28, 2010 06:26 AM
delta881972
Big Blocks
3
Mar 2, 2010 12:39 AM




All times are GMT -7. The time now is 01:15 PM.