Looking for N93 wheels for 1964/65, single wheels or a full set. These 14" wheels have the 3 T bolts that mount the magnesium wheel cover with the 2 bar spinner to the wheel.

please PM, thanks-

 

Can you post a picture of the wheel your looking for? If its a plane steel wheel what codes would be stamped in it? I've had some 1964 and 65 parts cars so if its a plane steel wheel I may have some originals. John

 

are they the wider 14/6 steel wheel similar to the R code wheel in 66 67

 

Thanks guys for your reply (updated the post) I dont have any pictures of just the wheel, only pics with the wheel covers/ 2 bar spinner.

 

This is the wheel that you need......

 

I got it this time..

 

The three T bolts plus the center is reversed, that should be easy to spot.

 

Also looking for a set of these rims... Yes I know this is an old thread

 

Rather than resurrecting several old threads in a lot of different sub-forums, why don't you just create your own Parts Wanted thread?

 

True, and I probably will, but...

1) All the members who were involved in these discussions my get notified of a response in a thread they subscribed to... alerting those who my have knowledge or leads on a set....
and 2) ...What fun is that?

Seriously though, I was hoping to reach out to members that may have leads to theses wheels vs a fresh "cold call" to many who don't know much about them as stated in #1 and this thread already has pics ...but I will probably start my own thread on it too.

 

And what about the guy that started this ad, now that you have hijacked it. His tough luck I guess.

 

Well, since the original conversation ended on June 2018 ...over a year ago, I may be doing them a favor and re-sparking the conversation about it… It’s almost the same as putting TTT or bump

 

....No hijacking intended

 

I’ve got a set. Email direct to dead@mchsi.com

 

I have a complete set of 5 for sale , have not come up with a price 50 , 500, 5000 ??? Never have seen a set for sale so no way for me to judge price , opinion's on price?

These are a excellent driver quality and could be show quality with some detail, 2 of the caps has had the mounting tabs welded, Of the 3 small wheel studs that hold the cap on , 1 wheel stud is missing 1 bolt and a regular nut was substituted 1 is missing the correct lug nut and a tapered washer and nut was substituted for this one. The 5th wheel has no studs it could be held in with regular bolts as it probably will be in the trunk. All the other wheel cover studs are the correct lug nut and stud. The last cover in the pics has a small chip in it , all the other covers are nice but not perfect.

 

Dan, PM sent thanks

Dave