Looking for a 425 or 455
#2
Fuel tanks are available new from the usual vendors, look for reviews on these, and choose accordingly.
Engine you may do well to cover truck [fastenal store?] shipping and get one from anywhere it is found.
#3
Hey i have a core 455 with your choice of Ebig valve or Ga heads small valve
Picked up block don't know history but do have a crank and rods from a cracked block that froze to go with it I would sell just make a offer I have a 72 intake as well
Also I know where a block that is 40over fresh cut with Arias forged pistons to go with it block was bored for these pistons he wants 1000 for it might have so e wiggle room he is a older guy stuck on his prices
All located in Salt Lake City
Picked up block don't know history but do have a crank and rods from a cracked block that froze to go with it I would sell just make a offer I have a 72 intake as well
Also I know where a block that is 40over fresh cut with Arias forged pistons to go with it block was bored for these pistons he wants 1000 for it might have so e wiggle room he is a older guy stuck on his prices
All located in Salt Lake City
#4
Okay here it is let me know if your still interested
69 block bare missing main caps will need line bore done unchecked block 75.bucks
Your choice of E heads big valve un checked or Ga heads small valve unchecked 75.00 bucks
455 crank rods and low compression pistions out of a marine 455 was rebuilt but froze basically I would use the crank only and trash everything else 50.bucks
72 stock intake valve covers free
You can use the mains off of the cracked marine block
You pick up in salt lake
69 block bare missing main caps will need line bore done unchecked block 75.bucks
Your choice of E heads big valve un checked or Ga heads small valve unchecked 75.00 bucks
455 crank rods and low compression pistions out of a marine 455 was rebuilt but froze basically I would use the crank only and trash everything else 50.bucks
72 stock intake valve covers free
You can use the mains off of the cracked marine block
You pick up in salt lake
Thread
Thread Starter
Forum
Replies
Last Post
steve walker
Big Blocks
9
December 17th, 2019 12:32 PM
steve walker
Racing and High Performance
5
September 28th, 2014 07:10 AM