H.E.L.P. I really need a decent 1967 oldsmobile trunk/deck lid. If so reasonable ???? Please help find. Thank you. John

 

Have some possabilities
2 -or 4dr /vert body ?

 

Hollander #868. '67 Olds 2dr H.T. / Conv only. No interchange with anything else. Unclear as if Four Door is the same.

 

1967 oldsmobile delmont 88 convertible 2 door. Thank you

 

67 four door should be same....do you have picture of 1

 

if it works how much for it ???

 

I didnt know they made a 4 door convertible ?

 

Decklid pix

 

she was riding in a 4 door convertable

But a 4 dr decklid is same as a verts in many cases..

 

will these pics work ?

 

 

For pix
certainly looks the same

 

if you go to Omishjon4@gmail.com that will expidite the matter

 

I have one in Ohio, zip 44481 BTW, I have a rust free trunk filler panel(with trunk hinges) plus some other 1967 88 convertible parts.

 

Kenny ,
do you have the stainless trim along decklids bottom edge between th doglegs at lights ?

And...plastic bumper fillers in front Lh , center & Rh ?

 

did you say you had a trunk lid ? How much. ???

 

$250

 

Have you had a chance to double check your measurments compared to ones I emailed you ????

 

The panel that you have the two mouldings on between the trucklid and the convertible top, I call that the trunk filler panel. It has the truck hinges also. This panel is usually rusted through. I have a rust free one. You need to put in your location. Shipping will kill you. I'll pm you.

 

Is what I recently herd it called wasnt aware 1 was required , but most are swiss cheese...ecept yours & 1 I have available & seein as how were neighbors & a few signs of this here thing stuck in reverse financialy I must recomend ALL of kennys products
pay the man already...

 

.............well...........................do you?.........................

 

& trunk trim if available ???

 

I don't think I have those, my parts were from a 67 Delta convertible, different trim package.

 

How about the eschuteons for ignition / lighter/ lights & wipers , radio ***** & plastic front bumper fillers , or stone shields ?
have you any of those available ??

 

Good luck finding those escutcheon pieces for the *****. I haven't found any. Considering having someone 3D print them, or take a mold off one of my good ones to duplicate by casting w/plastic resin.

 

How about the plastiic stone shields /fribt bumoer filkers ?

 

p to