71-72 Toronado

Old Oct 15, 2014 | 05:39 AM
  #1  
ostie13's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 284
From: Asheville NC
71-72 Toronado

I am looking for a couple parts off a 71 or 72 Toronado parts car.If you know where one is and can get the parts I need.Please let me know.I will pay you for the parts and your time. Thank you
Old Oct 16, 2014 | 07:55 AM
  #2  
ostie13's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 284
From: Asheville NC
anyone?
Old Oct 16, 2014 | 08:01 AM
  #3  
Octania's Avatar
Registered User
 
Joined: Dec 2011
Posts: 7,286
give it more than a day?
Search epay, have a search that notifies you.

Even in my extensive collection I do not have one of those.
Desert Dog in Phoenix?
Old Oct 16, 2014 | 08:40 AM
  #4  
halfmoontrail's Avatar
Registered User
 
Joined: May 2011
Posts: 435
From: Melrose FL 32666
Originally Posted by ostie13
I am looking for a couple parts off a 71 or 72 Toronado parts car.If you know where one is and can get the parts I need.Please let me know.I will pay you for the parts and your time. Thank you
I have a '70 Toro parts car in NE FL, let me know if the parts you need might be same on 70.
Steve
Old Oct 18, 2014 | 06:54 PM
  #5  
wmachmarc's Avatar
Registered User
 
Joined: Sep 2014
Posts: 25
From: xenia,ohio
Hi ostie13
I have parted out a 71 that I bought in 96,and drove it until 2011ish,started to rust really bad,so the ax came down,also parted a 72 about 10 years go,and I probably have some parts around,let me know what you are looking for ,I think I have a nos/rechromed front bumper center section
thanks marc
Old Oct 19, 2014 | 04:31 AM
  #6  
ostie13's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 284
From: Asheville NC
Hi Marc I am looking for the front plastic liscence plate holder and the rear plastic filler that the liscence plate is attached to. I also need the springs that goes on the hood hindges.Did you keep any of the interior pieces.Thanks Roy
Old Oct 19, 2014 | 05:55 PM
  #7  
Octania's Avatar
Registered User
 
Joined: Dec 2011
Posts: 7,286
well that helps
I have a 70 Toro parts car
Hood Hinge springs no problem
they will have some rust of course.
assuming 70=71 for this part
Old Oct 20, 2014 | 12:41 PM
  #8  
ostie13's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 284
From: Asheville NC
The springs on the 71-72 hood have 25 coils. The hinges I got off ebay has 28 coils and would not hold the hood up. When I call the man back I purchased then from he said they came off a Toronado but I think it was 77 model. When I see springs for sale that or on the internet they always have 28-29 coils on them but thats not strong enough to hold my hood up. The 71-72 Toronados have the heaviest hood of any other 70s car. I know I have taken it off many times.It always takes 4 of us.lol
Old Oct 25, 2014 | 05:36 PM
  #9  
wmachmarc's Avatar
Registered User
 
Joined: Sep 2014
Posts: 25
From: xenia,ohio
Hi Roy
I have a few things for toros,I need to check if I have hood springs ,I believe I do,let me look ,this next week,those hoods are heavy, I think 73-75 hoods are also as heavy,but I am not 100% sure,
thanks marc
Old Jan 1, 2015 | 07:39 AM
  #10  
wmachmarc's Avatar
Registered User
 
Joined: Sep 2014
Posts: 25
From: xenia,ohio
Hi Roy
I do have the hood springs and hinges,they have 24/25 coils on springs ,let me know if you still need them
thanks marc
mdmiller442@aol.com
Old Jan 3, 2015 | 04:27 PM
  #11  
ostie13's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 284
From: Asheville NC
Originally Posted by wmachmarc
Hi Roy
I do have the hood springs and hinges,they have 24/25 coils on springs ,let me know if you still need them
thanks marc
mdmiller442@aol.com
Yes I am interested in the springs. Please email me at ra.williams@live.com
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
QuinnKnight
General Discussion
21
Nov 7, 2019 05:19 PM
<NickC>
Big Blocks
0
Nov 10, 2004 01:32 PM
ElaineZ
Big Blocks
0
May 8, 2004 08:57 PM
72 toro
Other
0
Oct 9, 2003 10:49 AM
Bunch
Big Blocks
0
Jul 3, 2003 08:53 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:19 AM.