ctsplicer

Hello all.Due to a bungling idiot that rebuilt my engine before I bought the wifes car,I need 4 rocker arm studs.It's a 64 330 cid in a 64 Cutlass.And yes trhey are studs.This isn't the shaft style.The overall length is 2 inches.3/8 corse thread on the head end and 3/8 fine thread on the rocker arm end.Any help would be greatly appreciated.Thanks.They cross threaded 3 of them on the rocker arm end and cut corse threads into the rocker arm end on the 4th one.

2blu442

Just a thought, the 1965 330 with #2 heads have studs. Could it be that someone got rid of your shafts and installed 1965 rockers?

John

ctsplicer

From what I gleaned on one of the threads on here,they made some 64's with the shafts and some with studs.

Threejdsolds

I believe I have several of these from a 64 330 . Send me your phone # and I can text you pictures . John

ctsplicer

I don't pay for any of that fancy stuff so you can't text me pictures.So here's a couple of pictures of what I have.

Octania

said the owner of the

"06 Roush Mustang"

:-)

I would LOVE to know if you have #2 heads which are known to have studs or some ungodly rare #1 casting with stud provisions. Look at the corner of the head near #1 or #8 plug.

I just saw a whole SET of these at the homecoming but did not procure them.
Money's short
times are hard

someone here will hook a brother up

ctsplicer

Octania,you got me,but in my defense,I work for AT&T and so I don't want to give them any more of my money then I have to.Plus ,I hate phones.I know,doesn't make sense.

Threejdsolds

Sorry, both sets I have are the shaft style.

2blu442

I've got some #2 heads with these studs. I sent a PM to get your shipping address. John

ctsplicer

Thank you so much,this site is the best.car guys helping car guys.

2blu442

PM sent.

John

ctsplicer

2blu442 payment done thru pay pal.Thank you very much.

Octania

I still gots to know
Do you have #2 castings, which we EXPECT to use the studs... or uber-rare #1-1 castings with no shaft holders but stud receptacles instead?

Lord this car stuff sounds naughty.

ctsplicer

The heads are still at the machine shop getting new guides nand a valve job.When I get them back I will update.

ctsplicer

They arrived today.Again thank you so much.

2blu442

Glad to help out!

John