64 Cutlass parts needed
#1
64 Cutlass parts needed
I'm looking for an automatic floor shifter for a 64 Cutlass. Only need the shifter, not the console or wiring or anything else.
Also looking for these parts for the same car:
- all 4 wheel well moldings
- rocker trim moldings, both sides
- right side turn signal lens (in front bumper)
Please let me know if you have any of these parts.
thanks, Kevin
(car is in Denver, Co.)
Also looking for these parts for the same car:
- all 4 wheel well moldings
- rocker trim moldings, both sides
- right side turn signal lens (in front bumper)
Please let me know if you have any of these parts.
thanks, Kevin
(car is in Denver, Co.)
#2
64- 66 is the same . Good luck finding one that the t- handle tangs are not broken;
i have one modifies with another handle that wobbles on the stick.
A good alternitive with the staight stick is the 79 -87 shifter.
i have one modifies with another handle that wobbles on the stick.
A good alternitive with the staight stick is the 79 -87 shifter.
#5
found the drivers side , it does have a dent. if you are interested pm me your direct email for pics
a large dent that is that would require trim restoration. not sure worth shipping, also missing the little section 25.00 plus shipping
a large dent that is that would require trim restoration. not sure worth shipping, also missing the little section 25.00 plus shipping
Last edited by lunaboy; September 12th, 2014 at 03:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
HotRodRacer
Parts Wanted
2
February 8th, 2012 10:25 AM
oldsdelta67
Parts Wanted
0
June 10th, 2009 12:47 PM