1977 Cutlass Supreme Brougham Emblems
July 19th, 2018, 01:13 PM
#1
Registered User
Thread Starter
Join Date: Jun 2010
Location: New York
Posts: 74
1977 Cutlass Supreme Brougham Emblems
I just purchased a 1977 Cutlass Supreme Brougham which was restored a couple of years ago. The car was repainted and the script "Cutlass Supreme" and the printed "Brougham" emblems were not put back on the car. I am looking for 3 complete sets. I understand a set goes on the trunk and 1 set each go on either fender. Any help would be appreciated.
Sal B
Sal B
July 19th, 2018, 02:12 PM
#2
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
The 77 Cutlass Supreme emblems (script) is reproduced and sold by many of the restoration/aftermarket vendors. However the 'Brougham' isn't as far as my searches have determined. The CS scripts aren't very expensive - around $19.00 each
July 19th, 2018, 02:14 PM
#3
Registered User
Join Date: Nov 2011
Location: Ste Rose Manitoba Canada
Posts: 643
July 19th, 2018, 02:40 PM
#5
Registered User
Thread Starter
Join Date: Jun 2010
Location: New York
Posts: 74
Allan,
Those are exactly the ones I am looking for. The owner of the car painted the car and didn't have the emblems to put back on the car. He told me he couldn't bring himself to put them on after painting the car. I guess to each his own. He didn't even put back the half landau roof. What I would like to do to reproduce the first new car I ever bought is to put the emblems back on, the vinyl roof, and the pin striping I had. This is the car I just bought
July 19th, 2018, 02:52 PM
#6
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
IIRC in 1977 the emblems were attached with double sided tape. So when you line them up, better get them right the first time because once that stuff gets a solid contact it's not coming off.
The Landau roof is another story. If the car had that and was removed, the trim that goes around the sail panel and rear window is not reproduced. I did a search and found only 2 in the boneyard at DVAP. I believe 76 and 77 are identical on those Landau roofs. If you can't find the trim, there is a possibility that a shop can fab something for you. it won't be factory, but they can show you what they have and would do if it's possible.
The Landau roof is another story. If the car had that and was removed, the trim that goes around the sail panel and rear window is not reproduced. I did a search and found only 2 in the boneyard at DVAP. I believe 76 and 77 are identical on those Landau roofs. If you can't find the trim, there is a possibility that a shop can fab something for you. it won't be factory, but they can show you what they have and would do if it's possible.
July 27th, 2018, 05:13 PM
#10
Registered User
Join Date: Jan 2008
Location: Chateauguay, Quebec
Posts: 23
I have two fenders and a trunk lid in the backyard with those emblems on them, but after 40 years there is some pitting. One is particularly bad, one so-so and one not bad at all. Maybe combined with the one from Kyle's77 you could make a decent set.
July 27th, 2018, 06:04 PM
#12
Registered User
Thread Starter
Join Date: Jun 2010
Location: New York
Posts: 74
Found new emblems
Sorry I didn’t update this thread but someone contacted me with all new emblems including the hard to find “brougham” emblems. I went ahead and bought them. I should have them soon. Thanks everyone for helping
July 27th, 2018, 06:34 PM
#13
Registered User
Join Date: Nov 2011
Location: Ste Rose Manitoba Canada
Posts: 643
Thread
Thread Starter
Forum
Replies
Last Post
