So when doing some dash work i removed the gauge and the pin for illumination broke off in the connector. Looking for a replacement


also need and ashtray and door, preferably black.

steve

 

Someone suggested taking the gauge apart and putting a tiny machine screw through the hole where the pin goes - if you still have the pin.

 

You have a PM.

 

And soldering it after the screw is in place.

 

If that doesn't work,I have the whole cluster with good pins,and dated for a 70.

 

I remember seeing the pin... now if i remember correctly i may have left in harness. will try the machine screw and solder first.

Its strange have two of these guages and both have same pin broken.

Brian--- seems like you are my one stop shop, will try to fix if unable will be in contact

 

I have a spare ash tray door. Call me at 410-206-9427 Dave.