1970 442 Rear Drums-Bell Style Needed

Thread Tools
 
Search this Thread
 
Old Apr 5, 2017 | 08:45 PM
  #1  
70W30Jim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 92
From: Laguna Niguel, CA
1970 442 Rear Drums-Bell Style Needed

Hello Everyone,


Good Day. I am seeking a good set of "Bell Style" rear drums for a 1970 restoration. In '85 recall while in High School, we did a front and rear break job on the W30 in Auto Shop class and removed what I thought unusual at the time, not stock rear bell style drums and replaced them with finned style sourced from the local Olds dealership, never knew the bell style were original. Any help or leads will be greatly appreciated.


Also, since there's so little data/information on these drums found, as reference on what I'm looking for, I swiped a file photo from our Olds pal Mr. Jensen (I hope you don't mind)....
Old Apr 5, 2017 | 09:01 PM
  #2  
2blu442's Avatar
Moderator
 
Joined: Jun 2006
Posts: 535
From: Medford Oregon
I've got some extras of these. They should be turned to verify they're usable before selling/shipping. I'm up in Oregon so shipping should be too bad. I'll get you some pictures tomorrow. John
Old Apr 6, 2017 | 11:39 AM
  #3  
70W30Jim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 92
From: Laguna Niguel, CA
Hello John,


Thank you kindly for your willingness to help. I am anxious to receive information on your findings. Also, while you're going through your inventory, two is a bare minimum, but will take four if you have them as I will need additional for my Hurst.
Old Apr 6, 2017 | 01:28 PM
  #4  
jensenracing77's Avatar
Registered User
 
Joined: Feb 2009
Posts: 11,917
From: Brazil Indiana
lol, Don't mind at all... I have a set but have to much pitting on the outside to be worthy of a restoration. These are getting hard to find in nice pit free condition.
Old Apr 6, 2017 | 02:02 PM
  #5  
2blu442's Avatar
Moderator
 
Joined: Jun 2006
Posts: 535
From: Medford Oregon
Hi Jim
I don't have any loose drums, but have four rear ends with these drums still on them. Attached is a picture of one. I'd prefer to have it turned here, then we can know its good before you pay for purchase and shipping. But that's up to you. I am getting things together and will be up in Portland for the big swap meet this weekend. So it would be the beginning of next week before I could pull some drums and take them to the machine shop. Let me know if that will work for you. John

DSCN8326.jpg
Old Apr 10, 2017 | 02:33 PM
  #6  
2blu442's Avatar
Moderator
 
Joined: Jun 2006
Posts: 535
From: Medford Oregon
Hi Jim
I'm back home now. Please let me know if your still looking for drums.
John
Old Apr 10, 2017 | 03:38 PM
  #7  
70W30Jim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 92
From: Laguna Niguel, CA
Hello John,

Thanks for letting me know your back in town.

Absolutely, still in need. No rush, please take your time as I know you will get back to me in the next few weeks.
Old Jul 7, 2017 | 05:56 PM
  #8  
70W30Jim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 92
From: Laguna Niguel, CA
Hello John,
I'm just circling back to check in and see if you had an opportunity to scope out the bell drums you have and determine if they are in usable condition. Please let me know at your earliest convenience. Thx....
Old Jul 9, 2017 | 06:11 PM
  #9  
RAG's Avatar
RAG
Registered User
 
Joined: Nov 2012
Posts: 818
From: Near Albuquerque, NM
I just sold two, have 4 left if you are still looking, $25 each plus shipping from NM. UPS to IL was $30 for two. If still looking I can provide photos, PM me.
Old Jul 11, 2017 | 01:16 PM
  #10  
2blu442's Avatar
Moderator
 
Joined: Jun 2006
Posts: 535
From: Medford Oregon
Sorry for the delay. Just picked these up from getting them turned. Check out the photos and if your still needing them send me a PM or email. John










Old Jul 11, 2017 | 02:15 PM
  #11  
My442's Avatar
Registered User
 
Joined: Feb 2009
Posts: 2,257
Originally Posted by RAG
I just sold two, have 4 left if you are still looking, $25 each plus shipping from NM. UPS to IL was $30 for two. If still looking I can provide photos, PM me.
PM sent
Old Jul 11, 2017 | 03:05 PM
  #12  
70W30Jim's Avatar
Thread Starter
Registered User
 
Joined: Aug 2010
Posts: 92
From: Laguna Niguel, CA
Hello John,








Awesome! PM you now...
Old Jul 13, 2017 | 11:48 AM
  #13  
GEARMAN69's Avatar
Registered User
 
Joined: Jan 2008
Posts: 1,488
From: ENNIS TEXAS
I have 3 or 4 sets might could spare one set
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jensenracing77
Parts For Sale
3
Oct 21, 2021 11:14 AM
WTony
Parts For Sale
3
Apr 16, 2015 04:18 PM
jensenracing77
Parts For Sale
5
Jul 30, 2013 04:40 PM
coppercutlass
Brakes/Hydraulic Systems
18
Dec 6, 2011 01:00 PM




All times are GMT -7. The time now is 04:00 AM.