1964 Cutlass quarterpanel
#1
1964 Cutlass quarterpanel
Hey guys! I am a guy from sweden that has the problem that i can`t find bodypanels for my 1964 cutlass f85 could someone get me on the right track on where i can find sutch porducts in the states?
Best regards from sweden
Best regards from sweden
Last edited by Swedishf85; July 9th, 2018 at 01:31 PM.
#2
Welcome to the site! They're not reproduced, so your only source is to find a used panel. Do you need the entire panel, or could you repair yours with just patch panels? That would save you significantly in shipping. Whichever you decide, I'd encourage you to create a parts wanted thread. If you can make patch panels work, it would help to post pictures with the area outlined. I've got some quarter panels but they're not in great shape. If you decide to go with patch panels I may or may not be able to help, depending on how bad of condition yours are in. But there's other members here who also have 1964 and 1965 parts. John
#3
Welcome to the site! They're not reproduced, so your only source is to find a used panel. Do you need the entire panel, or could you repair yours with just patch panels? That would save you significantly in shipping. Whichever you decide, I'd encourage you to create a parts wanted thread. If you can make patch panels work, it would help to post pictures with the area outlined. I've got some quarter panels but they're not in great shape. If you decide to go with patch panels I may or may not be able to help, depending on how bad of condition yours are in. But there's other members here who also have 1964 and 1965 parts. John
#4
It looks like your working on a 4 door car, right? I have the front half of the wheelwell opening available, not sure about from there back. How is the inner fenderwell? Is it sound or does it need replaced or patched too?
John
John
#6
About the center of the wheel well back is the same on both 2 door and 4 door cars. I need to keep the back portion for a project car. So about the center of the wheel opening forward. I can include part of the door jam if you need it. I'll get some pictures for you.
John
John
#9
I was going to try and move the car so I could get better pictures, but I didn't get to that. Here's some photos I took, let me know if there's any areas you'd like to see closeups of or any areas I didn't cover here. I do need to remove the trim to assure there's no rust under them. I'll post additional photos when I get that done. You can have as much of the door jam area you need. John
#12
Swedishf85, did you find the parts you needed?
Daniel, sorry the dash is cracked. I sold the metal panel but don't remember if the package tray on top of it was good or not. I'll keep my eyes open for it.
John
Daniel, sorry the dash is cracked. I sold the metal panel but don't remember if the package tray on top of it was good or not. I'll keep my eyes open for it.
John
Thread
Thread Starter
Forum
Replies
Last Post