I have amassed far too many Olds parts, engines, transmissions etc, more than I will ever use. I want to clear out my garage to the point I can put another Cutlass in it that I am about to purchase... but I digress.

I have
three longblock 350's $200 ea (#8 heads)
several disassembled 350s (parts can be sold separate)
two disassembled 403's $250ea
one complete 403 (carb to pan and all brackets I think), $350
one longblock 455 (1968), $400
one DX diesel short block. $250
one 330 block $150 (I have the crank and flywheel for this block... i'd sell both together but NOT separate $350)

ALL of the above are CORE motors, that will require the appropriate rebuild procedures.

I have several sets of heads, from #4's to Ga heads. $100-$250 per pair.

Assorted V-8 valve covers, notched and embossed and one chrome set. $10-$50 each.

approx. 2 dozen assorted Qjet cores... nothing 442 or H/O special $40 each I used to have a part number list... somewhere.

I have one 1970 Cutlass fender that needs a dogleg. $200

Several 1971-72 fenders that need doglegs. $75

1971-72 Cutlass doors that need some TLC... some rot around the weather strip area at the top by the mirror but structurally sound. $150 each

MUCH MUCH More little piddly stuff trim, interior, door handles. Most of it driver quality. Come bring a truck. the more you buy the better the deal. I'd deliver if it was on my way somewhere. I frequently travel from Chas SC to Norfolk VA area. Planning a trip to NY in Sept and would consider delivering anywhere up the I-95 corridor or up through Delaware and MD over the Bay bridge.

email me at eightupman@att.net for quickest response. Prices are a guideline and nothing is firm. I want it gone, but not scrapped.

John

 

Bump one.

 

Pm sent

 

Do you have a 7027131 Rochester Q-Jet? If so I'm interested.

Thanks,

Tom

 

I am looking for the lower dash plastic with uncut radio area. Also a passenger side front side marker

 

Its possible.. I can't find my list so I'll have to dig them out and make a new list. My organizational skills are non existent.

John

 

Sorry I have two good dash pads but no uncut lower radio sections.

 

What color are the dashpads

 

Do you have any cruise control parts for a 70 cutlass?

 

Brown and black. The brown one has a flaw... someone thought it cool to inscribe a "Metallica" logo on it. It can be filled and painted. No cracks and kept in the house.. not the garage or shed.

John

 

Sadly no... wish I did though..

 

Hi there I'm looking for a set of std 350 pistons 14cc or less am trying to do a budget build on my 72 and need to bump up the compression . Thank you

 

I'm definitely interested in the black one. how much are you asking for it?

 

John,


I'll take a decent BB Q-Jet core 68-72


in this order:


7028253.....snicker.....snicker
7028251


7029252
7029253


7040251
7040253


etc, etc....


I could pay and then pick up at your dad's house if you could leave it there.....or you could ship it....(& I'll pay shipping)


Thanks,

 

Sent pm.

 

Looks like the only 350 pistons I have are .010 or greater.

Carbs are coming out and getting inventoried this weekend... please bear with me as they are buried.

Dash pads are 71-72... From what I understand the 1970 pads have different vent openings.. I could be wrong, I usually am.

DrBigBlock.. no PM in the inbox sir.

Couple of questions to answer to the masses... The ONLY 1970 specific piece I have is a fender... and it needs a dog leg. No "bumps" along the hood line...

Dash pads are pick up only... I'm not comfortable shipping them.

Motors and heads are considered rebuildable cores. I will not in any way tell anyone that these will run as is. Not happening.

Also I am in need of a few items for an upcoming build so I would consider trades if you are interested.

 

Grab a Corteco (or is it Cometic?) .028 head gasket set and plane the head .010.. quickest comp boost without tearing the engine down all the way. Will also slightly change your valve lift due to the shorter head height.

http://shop.rocketracingshop.com/HIG...EAD-GASKET.htm

John

 

Did you get to listing your carbs?
Wondering about a 7040253 Carb Real early Jan 70 or older preferred.

Thanks,

 

Do you still have 350 dx shortblock? Thanks, Mike

 

Eightupman, I'm looking for a truck trim piece. 67 442.

 

72 cutlass S dark brown saddle front split bench in good shape?

 

I don't have a seat. Sorry.

John

 

The only part I have for a 67 is a clear back up lens that fits below the tail light and a rough tail light.

John

 

Was worth a shot lol!
THANKS!!

 

Over two years later and I probably have collected a few of these cores by now. LOL

 

 

https://lynchburg.craigslist.org/pts...526583740.html

 

I did find and install an electric choke setup, I used it on a 1973 carb that I modified for a late model Cutlass with a 307, and needed the TV stud. As far as I know it worked because I only installed it and sent it out and he didn't tell me it wasn't working otherwise. if you want, email me eightupman@gmail.com and I may be able to build yours for under $300 OR supply you with a build one and swap that out as a core. Or build your 253.. or trade... i dunno, you can email me to discuss if you like.

John