lemoldsnut

Pedals of course and probably the drive shaft depending on your clutch size bellhousing and some of that stuff as well.

Best corrospondence for me is direct email: If I do not log into this site it does not forward to me timely.

lemoldsnut@aol.com

Larry

lemoldsnut

Also currently in:

5- 1967 Cutlass/442 instrument panels
2-1966 Cutlass/442 instrument panels

Price depends on what is included. Start at $300 plus shipping. No Tic Toc tach set ups so no need to ask. no floor shift bezels either.

Again best contacts are direct email at lemoldsnut@aol.com or calls 541-815-4363

442UDE

Looking for the Exterior chrome trim pieces:

• passengers quarter from Wheel well to the bumper
• and the smaller one going from the front of wheel well that mates up with the lower front portion of the quarter panel trim.
• chrome trim from drivers fender wheel well to door.
• 1967 post door chrome trim on door not vent window

Interior parts needed

• Also a black non A/C dash pad.

Engine parts needed

• 1967 400 alternator bracket
• Crank pulley
• Water pump pulley
• All non A/C with power steering

Thanks

Koda

Dash pads are irrelevant of AC in that year, so you just need a 66 or 67 black pad.

lemoldsnut

I have been waiting for the right time to make this announcement about a new service I am offering with my business. It is chroming. Not bumper rechroming but almost anything. This includes but is not limited to : (metal or plastic) dash instrument panels, arm rest bases, and pretty much anything you can think of. I started this several months ago. I worked through the kinks and am now offering this to customers. Thank you to the customers I have had who have helped me get this rolling.

Dash instrument panel restorations will be done with repairs to cracks and some other imperfections as can be done. I will restore your dash instrument panel or offer you one of mine. ( If I have one in stock.) If I take your instrument panel in to restore it will be numbered and cataloged digitally so you will get your panel back not some other panel. If you want to exchange your panel for another, this might be quicker turn around for you depending on stock on hand. Turn around on your panel will be 6-8 weeks, not months and months. All chroming will carry a 2 year warranty against peeling to the original purchaser. There will be a core charge and based on condition that will be waved or prorated. Repairs to your panel will be evaluated for each panel not that all panels will be the same. Some have different problems or none at all. I will reinforce the typical crack areas on most panels. I offer to do these also in not original configuration depending on what you desire, even chroming items that were not chrome originally.

Cost will be based on the item to be plated or restored. This is not vacuumed on aluminum so the typical delaminating and peeling will not occur, which can occur in less than one year, like the one I had done by someone else. I have been involved with restoring Oldsmobile cars for over 35 years and this service is not limited to one make, model or year. Each item will be evaluated individually. I will also offer parts for sale outright when available. Prices vary based on stock and what the service will require.

This is not a service I am offering as a sideline or as something I do in my spare time or when my other job allows or I take vacation from my other job to fill the obligations I have taken on.I have no other job to get in the way of my production. This is the primary business for me and I will give it my full attention and treat every customer as if it was how I wanted to be treated. I have many customers now that appreciate how I have taken care of them over the years. I will have a hand full of 66 and 67 instrument panels done for sale in a few weeks. I will also have arm rest bases and other items for sale soon. If you have items you would like a price on contact me. Emailing pictures of the items is best and your address to determine shipping.

I will not discuss or compare pricing or quality to Cheap Chinese reproduction parts. There is just no comparison to be made here.

Thank you and I look forward to serving all.

Larry Moyer

All inquiries should be to: Olds Parts and More, Larry Moyer, Redmond, Oregon 541-815-4363 lemoldsnut@aol.com

Koda

Oh good. I will send you stuff sometime in the next couple years once I get there.

forstatd

Can you chrome alternator brackets, power steering brackets, and pulleys? ... and if you do, do we just send you our stuff, and you chrome and send them back?
~Dave..

lemoldsnut

Yes to all of that.

Best to email me pictures of what you have to chrome and I will quote it for you.,

Direct email: lemoldsnut@aol.com

thanks
Larry
calls 541-815-4363

Sea five

A great service Larry
Good luck

sysmg

Great service.

Wynots66Cutlass

Do you have any hoods for a 66 Cutlass?

tdhill01

I just saw this, I wish you great success with the new service Larry.

lemoldsnut

No 66 hoods currently. Going to step back a little from the Olds parts side to do more of this Chroming, Will still do a car now and then as they become available.

Thanks for asking.

Larry
lemoldsnut@aol.com
541-815-4363

Currently have several 67 dash instrument panels and a few 66.

lemoldsnut

Just did some checking for someone else. I do have several of the 67 442/Cutlass upper taillight lenses in nice shape. I also have only one good lower it is a right also in nice shape.

these are $40 each. plus shipping.

Email direct always works best. lemoldsnut@aol.com

Or call 541-815-4363
Larry

And yes we are now doing dash restoration along with other plastic and metal chroming. I currently have about 8-67 and 2 - 66 dash inserts.
Contact me direct for more info.

GM MUSCLE

These are very nice!

lemoldsnut

Thanks,
A few more items I have for sale
#4 small block Olds heads $250 a set plus shipping
#5 small block Olds heads $350 plus shipping
C big block Olds heads $300 plus shipping
Ga big block Olds heads $250 plus shipping
68-69 big block intake manifolds without cracks in the center $200 plus shipping
69 253 442 4 speed qjet carbs $250 plus shipping
67 taillight lenses, several uppers only one right lower no left lowers currently $40 each plus shipping
67 wiring
67 core support
67 front bumper filler
67 very good core front bumper
65 66 and 67 frames
65 post doors
66-67 hardtop doors
some 66-67 fenders (no 66 442 specific fenders)
64-67 bench seat power seat track
66-67 power window regulators

calls or emails are best

lemoldsnut@aol.com
541-815-4363

34ford454

do you have a fan shroud for a 1967 olds 442 with a 400 block

rick@lindaleautoparts.com

As a matter of fact I need one myself. I do however have a numbers matching 1967 400 engine and 400 trans. out of a 67 442 complete. I also have a 67 Toronado complete car with 37000 miles.

lemoldsnut

Fan Shrouds for these are hard to find not broken. In the 70 plus Oldsmobiles I have owned maybe 6 had them still in good shape. As you have learned from your other posts, these came on A/C equiped cars and cars that had heavy duty cooling. 330 ad 400 same shroud. Automatic or stick trans all the same shroud. 66-67.
There is an aftermarket reproduction made. I am told it fits very poorly and is made of fiberglass. the original is plastic I believe it is ABS plastic. Have heavy duty cooling on my car.
I do not have any shrouds available currently for a 66-67.

Thanks
Larry

lemoldsnut

Just in a 71 Cutlass Supreme parts car. is a 350/350 car. Trans a core motor gone. Have other core 330, 350 403 engines, no big blocks currently for sale. This car has a pretty straight body with very little rust. West coast style very little not rust belt style. Bucket seats, (have all new in the packages PUI black upholstery) Fenders, bumpers, hood, doors dash all decent, Would consider selling as a entire car to restore. Very little body work needed. Wheels and tires in the pictures not included, Just rollers included.


As always best to contact direct at lemoldsnut@aol.com

or calls 541-815-4363


Thanks
Larry

rroth01

I want to see this...You take Shots at me...Get Ready Larry Moyer .

fixxur

do you have a 442 hood for a 67 or 66

lemoldsnut

66 and 67 hoods do not interchange what year is your car?

fixxur

1967

lemoldsnut

that is a 67 only 442 hood with louvers. I am out of these currently Jonathan Mott in Twin Falls Idaho has one for sale I believe.

68DeltaCustom

lemoldsnut

no 67 Tilt columns currently. They are 67 ONLY.

Currently have as parts cars:
68 Cutlass Supreme 4 door
71 Cutlass supreme 2 door
65 F85 2 door post
65 Cutlass 2 door post
66 Cutlass 2 door hardtop
67 F85 4 door post
67 Cutlass convertible
3 67 Cutlass supreme 2 door hardtop

and a 40 x 40 two story shop full of Olds parts

Just in a 64-69 4 speed console $1500

Email direct is best lemoldsnut@aol.com
calls 541-815-4363

vickycar

just in case you can;t find post door trim 66-67 gto same trim

JJ114

lemoldsnut

Yes a full dash instrument panel restoration.

I also have a 64-69 original 4 speed console for sale now. it will come with the 65 style tachometer.

This is driver grade but could be show if restored.

$1525 Plus shipping.
Email direct is always best lemoldsnut@aol.com -
or call 541-815-4363

Larry

NiceOld(s)Car

A while back you listed some 67 442 fenders. Do you still have them and if so what condition and price? I'm just starting on a restoration and not sure if I'm going to be able to salvage or need to replace the right front fender on mine. Won't know for sure until I get more into it to see how bad the damage was that was previously repaired.

lemoldsnut

so far yes I do

please email direct lemoldsnut@aol.com
or call
541-815-4363
thanks
Larry

lemoldsnut

Now that I am back from the Portland Swap Meet here is a list of some of the stuff I have.

As always just ask if you need something. Maybe I have it and maybe I don't or maybe I know where it is.

Front Fenders:
64 both extremely nice
65 big car a nice pair
65 Cutlass left usable not rotten a dent
66-67 have a few some need a little work
68 both very nice right, left good needs a little work
70-72 I have two really nice ones on the 71 Supreme (if I part it out)

Doors:
65 2 door post doors
66-67 have a few good hard top/convertible and a left for a 2 door sedan and all 4 for a 4 door sedan
68 I have a 4 door sedan various conditions email
70-72 again have a nice pair on the 71 Supreme (if I part it out) also might have another left door

Hoods
65 nice solid hood
67 Cutlass/F85 no center molding holes very nice hood have a 442 hood but as of this post it is pending a sale
70-72 a Supreme hood nice with hood lock holes

Trunk lids
65 nice 2 door trunk lid
66-67 several
68 a convertible one solid has a dent (very fixable and usable)
70-72 Supreme solid

Quarters:
65 only a left section
66-67 rear halves (wheel well backZ)
66-67 right off and ready
68 good right 4 door
70-72 both on a supreme


I have many 68 parts also like: Cutlass grill, 442 hood louvers and trim, hood latch complete assembly, 68 right hood hinge, 68 bumper cores, 68 only 442 right exhaust manifold, 68 front fender marker lights, 68 rear marker lights, 68 convertible trim on quarters front trunk molding, 68 heavy duty clutch fan, 442 style taillight

grills:
65 good grill
66 good grill
67 good grill
68 good grill

several various olds hub caps all 14"

64-69 4 speed console in very nice driver condition

I am restoring 66-67 dash instrument panels also. This is a show quality restoration and the turn around on these is about 8-12 weeks. price is $1100 plus return shipping on your good instrument panel. If you do not have one from time to time I will have ones to buy outright. contact me about that.

As always email direct at lemoldsnut@aol.com
or call 541-815-4363
Larry
Olds Parts and More
Redmond, Oregon

george landis

Larry, any SSII rims? Either 14 X 7's or 15 X 7's. going on a 1971 cutlass. thx. George in south Alabama

66-3X2 442

Hey George,remember me? I have wheels too.

lemoldsnut

Get with 66-3x2 442 I am way too far away to ship wheels and kind of hold on to rally wheels for projects.

Thanks for checking with me
Larry

lemoldsnut

Just in today a trailer load of parts, A 67 330, a 68 350 with #5 heads, 2-73-75 style 455 stick shift motors. All high mile runners so should all be rebuilt but great cores without knocks or issues.

Email me or call for details on pricing.
Again located in Redmond Oregon

330 has #4 heads would sell as a long block for $350 that is what the heads and crank is worth.
350 same deal
455's both have J heads would sell for $600 each.

Also got in many toronado pans, manifolds, starters, many brackets and pulleys.

As always call or email direct

Larry
Olds Parts and More
541-815-4363
lemoldsnut@aol.com

forstatd

Looking for front/rear bumper brackets for 66' 442. Good condition no rust...?

lemoldsnut

I will check for you tomorrow. Pretty good chance of some or most of it.
Larry
Direct email is best at lemoldsnut@aol.com

Larry 541-815-4363

Alex Cat

Hi I'm looking for an 1967 Cutlass Heater A/C Distribution Duct / Plenum. It's basically the part which connects with the heater duct that goes to each the driver and passenger air vents. Would you happen to have that part by any chance? Warm regards, Alex