Cleanup time.

403 short block - #2 rod got loose, didn't spin bearing $50 SCRAPPED
403 short block - ran good saved for core 20+ years ago $100 SCRAPPED
403 Heads - one pair core, one pair from low mileage Olds 98. $offer SCRAPPED

Mondello 18-20 cam used less than 1k - $50
'72 350 cast iron non-egr intake - $25 - prefer not to ship
Olds stick Bellhousings - $100-$250
Z-bars - need to verify these are Olds - $ ?

Crates and crates of Olds SBO engine hardware, parts, brackets, pullys & accessories. Email with needs

Doug Thorley SBO headers 68-72 A-body. Brand new, no box (not tri-Y) - $150 SOLD

Caddy Seville (SBO) EFI parts and complete setups

'72 complete uncut dash Tan color ("saddle"?) $offer
'72 Complete A/C setup firewall forward - condenser, compressor, brackets, hoses, evap, suitcase $offer will seperate if no interest whole

'71 fan shroud no cracks near mint $60 SOLD

70-72 OEM wiring harnesses

70-72 442 rear bumper good for "Survivor" or core. Will trade for equal non-442 bumper + $100
70-71 wide body molding incomplete set, email with needs.

70-72 steering columns, both column & floor shift
72 Olds bolt in axles, new seals & bearings, never installed - $200

wanted/trades

T-44 hood lock assembly - just the underdash part and cable. Don't need hood latch.
'71 CS wide body molding between the rear of door and front of wheelwell.

Open to offers on most items... worst I can say is "no". All of these parts were pulled in the late 80's and have been in indoor storage (attic, dry basement) ever since. Ask if you don't see what you need. No sheetmetal, no 442 exclusive parts.

Located on Long Island, NY, 30 min east of NYC. Exit 39 on the LIE / I-495

PM or email sportfury383@yahooDAHTcom (remove the DAHT). Will respond by phone if you leave number and callback time.

 

The 403's go on the scrap truck monday AM unless a buyer is found, I need the room in the shop back.

Fan shroud , headers, 71-72 442 bumper pending sale.

 

Z-bars are not Olds,maybe Buick,or Chevy.

 

The alternator setup on my 455 is a non-a/c. There is the lower bracket, upper bracket, and then a bar that bolts to the upper bracket and goes down to the water pump I believe. I need that bar that attaches to the upper bracket. I can take a picture if it'll help.

 

What do you have for brckets/pullies for 403's, i need everything

 

Have both ac & non-ac setups. Which do you want?

 

Want ac, hopefully a simple early 70s set up, if it will work on the 403

 

Is the '72 AC gear still available? How much for all of it?

 

CHeck your pm's and see attached pics

Note the suitcase has a small hole on it from where it rubbed against the inner fender due to frame mount rot. I have the A6 compressor engine bracketry not shown, came off a 350. Condenser includes the brackets to mount to the radiator support.

 

See attached not the best pic. R4 brackets, p/s pump with lower alt bracket, upper alt bracket. 3-groove a/c crank & water pump pullies not shown but do have.

All came from a 403 in a Olds 98 2 door, think it was a '79.

 

Do you have early 70s heads?

 

Nope, I do not.

 

I might be interested in some pulleys. What do you have? I'm pretty sure I will want 403 non-A/C. I did some investigating and I think '77-'79 403 with NO A/C will work. Can you PLEASE call me at 410-206-9427. I will explain what I'm trying and what I need. Thanks in advance, Dave.

 

you have a pm on the dash

 

Replied along with other PM's received. Thanks!

 

You have PM on the intake.

 

sent a pm.