Once again I'm looking at the stuff I've collected and know I'll never use it all. I'm listing doors I have, most in good condition although a few will need door skin dents straightened. I'd pull the internals out of them to lighten for shipping. If you were close enough or passing through and could pick up in person I'd discount the price by $25. Many of the doors are buried in the shed. If there's one your interested in I'll dig it out and rinse off the dust, then take pictures for you. Located in Medford Oregon.

1954 Olds 88 2 door hardtop $100 ea
1954 Olds 88 4 door post $75 ea
1955 Olds 88 4 door post $75 ea
1955 Olds 98 4 door post $75 ea
1964 Cutlass 2 door hardtop. Multiple sets, $75 to 150 depending on condition
1965 Cutlass 2 door post, dents in skin but no rot issues. $75 ea
1965 Cutlass 4 door post $75 ea
1966-67 Toronado, one set had power windows one set crank windows. $75-100 ea
1966-67 Cutlass 2 door hardtop, Multiple sets, $75 to 150 depending on condition
1968 Delmont $50-75 ea depending on condition
1968 Olds 98 4 door hardtop $50-100 ea still on the parts car
1968 Cutlass, had power windows. $150 ea
1968-69 Vista Cruiser, multiples $75-150 depending on condition
1968 Cutlass 4 door hardtop $100 ea
1968-69 Toronado, both had power windows. $75-100 ea. Still on parts cars
1970 Olds 98 4 door hardtop $50-75 ea still on the parts car
1970 Toronado $100 ea
1970-72 Cutlass 2 door hardtop, multiples singles and sets. $100-150 ea depending on condition
1970-72 Vista Cruiser, multiples $75-150 depending on condition
1970-72 4 door, front are the same as Vista Cruiser but the rear doors are different. $75-150 depending on condition
1970-72 Cutlass 4 door hardtop. Had power windows. $100 ea

Due to shipping costs being spendy, if you want to purchase a door and have me cut and ship just portions of it contact me so we can discuss it.

 

im looking for 2 doors lf/rgt for 1972 cutlass supreme. power windows,locks if you got them
I found some with new skins on them.
G

 

OK, I'll dig out a couple and take photos for you. Not sure I have power windows/locks for them but I will check. What part of the country/world are you in? If you would send me your shipping zipcode or postal code I'll get a ballpark idea of what shipping costs would be. John

 

Updates. Well I guess I should have dug these out before making the listing. The 1968 doors each have rust in the lower front corner. Skins look good. So price on them would be $50 each if someone wants to use them for parts or patch them. Then the 1970-72 doors I found I've got three good passenger sides but the drivers sides either have dents or rust. So pass side are $125 to $150 and drivers side are $50 to $75 depending on the condition.

 

If you have a door you are willing to cut it up, I need the top left corner of the drivers door.

 

Yes I do have a door I'd be willing to cut up. I replied to this question through a PM. John

 

can you say scam!!

 

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 

Do you still have any front passenger door for a 68 vista cruiser available still. I’m up in Washington could pick up

 

Yes, I do. It's on a parts car so I'll need to move some clutter around to pull the door. But I'll do that and get some photos for you. I may have the fender but will need to look and see, the nose is off the car. John

 

Jeremy, I pulled the door off the car but am losing daylight. So I took several pictures of it as is, but it really needs a good cleaning! It does have dents in the woodgrain, near the bottom door hinge. Then there is rust on the front bottom corner, but it's not gone through or soft. This is a 1969 so the side trim is likely different from your 1968. Check out the photos and let me know what you think. John

 

On your 68 Cutlass 4-door Hardtop rear doors. Do you have the Body Pillar Sealing Strips/ U-Shaped door jamb seals that are mounted at the front of the door under the window? I am looking to find some that can maybe scanned in order to 3D print since they are not made. They don't have to be good, just enough there be able to scan to get a model to 3D print.

Thanks

 

Definitely want the door. Any other passenger front end parts available. I appreciate you replying so quickly. Medford isn’t to bad of a trip. I’d be able to come pickup. Im helping my friend find parts to fix his vista cruiser after someone backed into it. I you want to shoot us a text or call. Thanks

 

Good morning Noel. I know I've got the doors, door panels, and the large plastic cover for the post between the front and rear doors. I'm not picturing the exact piece your describing, but will see if I can find it in the assembly manual. John

 

I'll send you a text. It's better to send things like phone numbers or personal email through private messages. Sometimes scammers will search posts looking for personal information.

 

These are the pieces I am referring to. What color is the interior parts of your car? Do you have more parts than the doors from this car?

Thank you.

 

Good morning Noel. I don't know if I still have those, but I'll look through the clutter and see what I can come up with. About 15 years ago I parted out a 1968 4 door hardtop. Around the same time I purchased the remains of a 1970 4 door hardtop from a guy in a neighboring town. The 1968 had a black interior, I may have some door panels left. The 1970 was a Supreme with cloth door panels, tan or off white, power windows/locks. I'm pretty sure I still have those door panels. I think I have the hard plastic covers for the pillar, from the floorboard up to the windows. Not sure what else I have that might be 4 door hardtop specific. John

 

Any nice non pitted chrome door handles off a 70 cutlass?

 

I'll have to look and see. I believe they would be the same for 1970-72 Cutlass 2 door, correct?