'70-2 Horn relay (repro), '70 repro 4 spd woodgrain, '70-2 Ashtray
December 7th, 2017, 01:02 PM
#1
Registered User
Thread Starter
Join Date: May 2008
Location: Austin, Texas
Posts: 3,134
'70-2 Horn relay (repro), '70 repro 4 spd woodgrain, '70-2 Ashtray
3 items....
>Woodgrain Insert - Metal backed repro '70 4 spd console woodgrain insert. Grain pattern/look is not a perfect repro of the original and may not be as close as H & H's version but nice new inserts for a driver, etc. Back of metal has a peel-off 3M adhesive coating $20 for the 2 piece set.
EDIT: Woodgrain sold pending payment
>Repro Horn Relay - '70 - 72 Cutlass/442. Just tested and it works. Otherwise never installed on a car. Includes flange nut for the wire post and a black phosphate hex screw for attaching to the fender jamb. There are a few small "spots" in the plating on the engine side of the metal cover. Nothing terrible...not pits.....more a slight specking/discoloration in the plating. These sell new for $65. $30 for this one.
>Original Ashtray - Refinished - Fits '70 - 2 Cutlass/442 but is more "correct", appearance-wise, for a '71/2 with the slightly off black epoxy finish and black plastic slider bars ('70 ashtrays were zinc/silver with natural color slider bars). No pitting in the original metal finish but there is one small ding in the bottom of the tray (circled in yellow but not visible when installed in the dash). $30 for this one.
EDIT: $25 (and shipping) on the ashtray takes it
Shipping is extra but all of these will fit in smaller packages so should be reasonable (ie - USPostal).
REGULAR CHECK or MO for payment.....no paypal
>Woodgrain Insert - Metal backed repro '70 4 spd console woodgrain insert. Grain pattern/look is not a perfect repro of the original and may not be as close as H & H's version but nice new inserts for a driver, etc. Back of metal has a peel-off 3M adhesive coating $20 for the 2 piece set.
EDIT: Woodgrain sold pending payment
>Repro Horn Relay - '70 - 72 Cutlass/442. Just tested and it works. Otherwise never installed on a car. Includes flange nut for the wire post and a black phosphate hex screw for attaching to the fender jamb. There are a few small "spots" in the plating on the engine side of the metal cover. Nothing terrible...not pits.....more a slight specking/discoloration in the plating. These sell new for $65. $30 for this one.
>Original Ashtray - Refinished - Fits '70 - 2 Cutlass/442 but is more "correct", appearance-wise, for a '71/2 with the slightly off black epoxy finish and black plastic slider bars ('70 ashtrays were zinc/silver with natural color slider bars). No pitting in the original metal finish but there is one small ding in the bottom of the tray (circled in yellow but not visible when installed in the dash). $30 for this one.
EDIT: $25 (and shipping) on the ashtray takes it
Shipping is extra but all of these will fit in smaller packages so should be reasonable (ie - USPostal).
REGULAR CHECK or MO for payment.....no paypal
Last edited by 70Post; December 7th, 2017 at 06:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
